SIMPLICITI BSP using MSP430F5324 not compiling
I have created a BSP based on MSP4305324 and CC2500. I have followed the porting guidelines and made changes to the all the files as required. I used the ez430 RF board as the base to copy to my...
View ArticleHow can I program the piccolo so that it works stand alone?
Hi everybodyI'm working with the HV Kit with a Piccolo f28069 with InstaSPIN and CCS5. How can I program the piccolo so that it works stand alone? The flash memory is programmed right.Is there another...
View ArticleTLV320AIC3204: How to route the I2S data from ADC to DAC?
Hi, How to route the I2S data from ADC to DAC? Thanks!PY Tsai
View ArticleTMS570: SCI Rx interrupt problem
HI Team TI,In my design I have confgured SCI2 Rx as interrupt(code taken from halcogen).Whenever i receive the interrupt the Intvec register is updated with 0x0000000B, which is receive interrupt...
View ArticleClik here to view.
Connection OMAPL138-LCDK + LCD TM035KBH11
Hello.I've faced with a problem of connection L138 - LCDK LCDC interface with TM035KBH11. Logic levels provided by L138 ranges up from 0 to 1.8V. But TM035 uses 3.6V levels. For some signals lcdk...
View ArticleUSB bulk with speed higher than 64 KB/s with LM4F
Hi,I'm new to USB and I'm trying to get more than 64 KB/s (more than 1 packet per frame) using bulk transfer.I'm using the usb_dev_bulk example to which I already have made some modifications:...
View ArticleAM3358のGraphics Accelerator (SGX)について
AM3358 Starter kitの評価をしているのですが、Reference manualのGraphics Accelerator...
View ArticleMSP430G2553 ADC10 ENC clear problem.
Hi,I am reading two analog pin P1.4 and P1.7 on MSP430g2553. I am using ADC10 single channel single conversation mode in CCS compiler.The problem is I am reading AN4 pin then ı am reading AN7. when I...
View ArticleG3-PLC + TMDSPLCKIT-V3
G3-library of a TMDSPLCKIT-V3 based on F28069 provides to change the start tone frequency and the number of carriers at a G3-OFDM-signal. I'd like to reduce the frequency spacing between the G3-OFDM...
View ArticleA C6678 IPC interrupt question
Hi all,I meet a problem with the IPC interrupt, i writed IPCGRx to set up a interrupt to corex. when i set a specific vector id except for the 4th vector id, the target core will enter twice...
View ArticleLED/LCD 3 Digit - 7 segment Display Driver
I am looking at using an MSP430G2313 Value Line uC + LCD or LED driver (I2C or SPI).For example, the display I am looking at is a ChromeLED P/N: SDTA28R2WI have tested the code using the MSP -...
View ArticleFlash Start-up fo Logic PD EVM C6748
Hi guysI'm highly frastrated about flashing some application to the Logic PD EVM board with C6748 on it. These are my steps to fulfil this task based on the led blinking lab from Student Workshop Guide...
View ArticleADC more than 1 channel not working (RDK IDM)
HelloI am working with RDK IDM . I got success in displaying data that sensed by sensor with CH0. Now I stuck at getting data from 2 different sensors with CH0 and CH1.following is my code.I am getting...
View ArticleeZ430-Chronos-433 Firmware for new models
Hello,I recently bought the the Chronos watch (433 MHz version). The production date on the back of the packaging is: 01/2013.I flashed the watch via IAR Emebedded Workbench with the Firmware provided...
View ArticleUnable to download the latest CCS versions
Trying to download 5.3 and 5.4 from the website both for Linux and Windows, but I am getting this after entering the details (i.e. my email, company url, country, and so forth): "Sorry! We couldn't...
View ArticleHow to run two threads same time in msp430g2553
I want run real time clock (RTC) in separate thread and remaining program as main thread.In main thread i will get the real time clock value and based on that i will un main thread.please give some...
View ArticleSYS/BIOS vs XDCtools vs CCS
Greetings!Refer to the SYS/BIOS download page.The latest version of SYS/BIOS, 6.35.1.29, is recommended for use with XDCtools 3.25.0.48.In reviewing the release notes, the SYS/BIOS actually requires...
View ArticleEMIFA 16bit (C6747)
Hi,I'm using 16bit adress device.But I don't konw pin connection.C6747 device have EMIFA_A[12:0] interface.How Can I use EMIFA for 16bit address device.Pleas, inform me.Brady.Thanks & Regards.
View ArticleKeystone II Hyperlink SerDes Config
Hi,I have read the Hyperlink user guide (sprugw8b) and it states that "SerDes module information for Keystone II devices is not provided in this user guide. Please checkfor availability of the SerDes...
View ArticleEZSDK-DM814x-EVM demo capture error
Sir, I am using prebuild EZSDK-DM814x-EVM image (version : 5_05_02_00) on the DM8148-EVM and i am using LCD for display & USB camera for capture. I can play the demo videos through the demo...
View Article