How to get SGX Device Driver working with WinCE6 on AM335x?
Hi,I am trying to make WinCE6 run on AM335x. And I need SGX OpenGL supportrd to work with WinCE6 on AM335x.But I only have SGX working with WinCE7,get it from WinCE7 BSP version 2.30, I do not know how...
View Articlexdc.cfg.SourceDir : Build of generated source libraries failed: exit status = 2:
hi,I am using CCS v5.2. I installed av_bios_sdk_00_08_00_00 to my pc. when i try to run the BIOS_AVSDK project for BOP(back over prevention) program i got this error. I am using xdctools_3_24_03_33....
View ArticleNEED HELP CC430F6137
CAN ANYONE CHANGE THIS CODE TO CC430F6137 THIS CODE IS WRITTEN IN MSP430F123I AM GETTING ERROR AT DCOvoid sys_init(void){ // Configure P1.0,1,2,3 to generate an // interrupt on high-to-low signal //...
View ArticleECC corrupted by U-Boot when mounting UBIFS image
We have a custom made AM335x board I'm working on and I have encountered a problem when mounting an ubifs image from nand. If I ...(1) Write an ubifs image to nand(2) Mount the ubifs image(3) Repeat...
View ArticleAM1808 Android porting steps
Hi,I am using Texas AM1808 Target. Before i have worked in Qt application and linux drivers. I am new to android. I want to port the android image on to the AM1808. I wish to download android froyo...
View ArticleMSP430F5529 USB-Exp-Board ADC
Hello everyone!I have a big Problem using the 12 Bit ADC on my MSP-EXP430F5529. Ref. Vol. is 2,5 V. But If i am trying to measure i get at about 0,5 V the maximum of 4095 . I am using the Pin 7.0 (ADC...
View ArticleMSP-EXP430F5529 Experimenter Board's ADC value display on LCD
I am developing an application where i can take analog readings on port 7.0 of MSP430F5529 (A12 channel of LCD), I am using variable resistance to take reading on port 7.0 (Channel A12). on board...
View ArticleTrigger input trouble
Hi,I use the DLP Light Crafter which synchronizes with trigger input from camera.Although, I succeeded to make up the system, there is a serious noise trouble.The problem is that the light crafter...
View ArticlePCI1520 connect
Hi,if customer just use PCI1520 channel A, how to connect channel B signal? floating is OK? thank you.
View Article1 fatal error detected in the compilation of "C:/Program...
Hi,I am using CCS version 5.2 and I am trying to build the TICTSR demo project from TI.I am encountering the following error on building this project :**** Build of configuration Debug for project...
View ArticleNo Display on EB-LM4F120-L35 Boosterpack
I have been trying to get the EB-LM4F120-L35 booster pack to work with the Stellaris Launchpad without success.I am following the getting started workshop workbook and I initially tried to run the demo...
View ArticleCC2540 Keyfob to act as a master & usb dongle as a slave( swap operation)
Hello..I have the BLE v1.3 stack being installed. I want to make my KEYFOB act as a MASTER and USB DONGLE as a SLAVE..Can this be done? If so please help me out in achieving this task...Thanks...
View ArticleLinker Issue CCS V5 Unresolved Symbols Constantly Changing
I feel like this issue is a simple one and that I have just completely missed a step in setting up my Stellaris Launchpad but I will try anyway. Currently when I try to build my project I am receiving...
View Articleomx work with vip1
Hi allI want to use OMX capture the video and display on the LCD. our decoder is connected to VIP1 portA , I can use saLoopBackFbdev to capute the correct video data, but this example work under V4L2...
View Articledefine ports
hi i need define bits on port 2 and 3. When i have only one ports, its easy, i write fo example #define LED BIT1 ; and have led on P1.1 . I need put some data on port 2.2 , how i define somethink like...
View ArticleOMAP-L138 Wince 6.0 BSP Network problem
HiI am using the Zoom™ OMAP-L138 Development Kit.(OS: Wince 6.0 R3)when the network transmission test is carried out continuously , the system is down after a certain period of time.(about 18...
View ArticleCC1190 in 433MHz
It is possible to use CC1190 in 433MHz (with diffident passive components)?
View ArticleFrequency hopping with CC1120 or CC1121
Is it possible to implement simple frequency hopping within the 902-928Mhz range using the CC11220 or CC1121 @125Kbs 4GFSK?
View Articlef_read() xml problem
Hi,I am trying to read an xml file which is settled down in sd card. I can open and read an .txt file but not able to do same for .xml. Actually f_open() returns the xml is opend but f_read() is not...
View ArticleUnderstanding setting timer trigger periods
I'm setting my Stellaris Launchpad clock speed at 40Mhz (at least I *think* I'm doing that :)):SysCtlClockSet(SYSCTL_SYSDIV_5 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_16MHZ);I need an interrupt...
View Article