Clik here to view.
Does TI or Appro 2A library support SONY IMX122?
Hi all: We got Appro IPNC_DM368_IMX122_2.6_Release20130417 software package.But when we compile and test it.we found error result.And when the ipnc display black and white color video, it displays...
View ArticleCC1101 does not go into receive mode on issuing SRX
Hey all!I'm an undergraduate student working on using CC1101 as a receiver using msp430. On issuing, SRX, the chip status byte is either 0x0f (CC1101 remains in idle mode) or 0x4f (calibrate mode)....
View ArticleQuestions about Cameras for DLP LightCrafter
Hi, I am a newer with DLP LightCrafter. I want to start a new project with DLP LightCrafter for 3D pictures of teeth, but I didn`t find the useful information about what kind of camera can use for this...
View ArticleAM3359 SPI Clock out frequency:
Hi,We have ICE board,As i'm new to this AM3359 processor i have few doubts related to SPI clock out frequency,AM3359 is configured as Master mode for SPI Communication.We are trying to change the SPI...
View ArticleMcASP/EDMA3 issue
HiOn OMAP L138, the McASP and the EDMA3 do not work properly when the number of TDM channels to be transmitted by the McASP are less that the number of slots in the TDM bus. The McASP enters into...
View ArticleOPA211 , OPA2211, OPA2111 / power on sequence of Positive Power Supply and...
Hello, Could you please let me know the power on sequece of V+/V- power supply for OPA211, OPA2211 and OPA2111? My customer use these device by +/-10V ~ +/-15V.And in thier system, negative supply is...
View ArticleHDP Profile
HiMSP430 BT stack supports only two BT classic profiles SPP and A2DP but we want HDP(Health Device Profile) then how we can get this profile?Regards,Amit
View ArticleAM335x DCAN module - RAM parity
Hi,Why does the RAM of the DCAN module implements parity error detection?Is this RAM more susceptible to errors than the other on chip RAMs?Best,Vasili
View ArticleHow can i use MEMS microphone with MSP430F2013 ?
The MSP430F2013 includes a five channel multiplexed sigma delta analog to digital (AD) converter. The AD converter has up to 16 bit resolution as well as an on board reference voltage. 2^16 levels of...
View ArticleRecovery from 'upgrade'
In a moment of insanity I let CCS do an upgrade yesterday, no suggestions on how to recover?I had an installation from may based on 5.2.0.00069 that I have used daiily since then, after the upgrade i...
View Articlecan bq34z100 be used with protection circuit
Hi, I need to build an external fuel gauge for an 8s LiFePO4 battery pack. Is bq34z100 suitable for use with batteries with integrated protection circuitry? I don't have access to the cell stack...
View ArticleStellaris GPIO Configuration issue during power-up
Hi,This is regarding stellaris GPIO issue.I understand that Stellaris(LM3S) is not recommende/suported these days,but our customer is still using LM3S591 because they many devices left in their...
View ArticleError connecting to Experimenter's Kit
Hello,I am quite new to the TI DSPs and I've been trying to play with the TMS320C2000 Experimenter Kit and an F28335 controlCARD. I am using CCS v4.1.0.02005. The Target Configuration is set to TI...
View ArticleCC2540 Continuous write and read.
Hello all!I wish to program the dongle to write to a specific handle on the keyfob and then do a read from the same handle. I want to do this contiuously.I'm using simpleBLECentral.Right now I've...
View Articlesearch a switch for spi master
Hello everyone, I have two spi master (2 x MCU) to control the same device and I search a switch to provide the function (switch to one of SPI master wich will be use). The switch input can be...
View ArticleResources required to G726 Encoder and Decoder
Hi all,I downloaded from the page of the TI G726 Encoder and Decoder c55xx, but there are questions.http://software-dl.ti.com/dsps/dsps_public_sw/codecs/C55X_Speech/index_FDS.html G726 Encoder and...
View ArticleHow to ensure that during read vars they don't get updated in interrupt
I have a interrupt which reads RTC registers & one another important function every 1 sec after.Now in main code I read these registers, how to ensure that while reading they don't get updated in...
View ArticleClik here to view.
Full Ethercat Application (SSC) Not Compiling
Hello everyone,I have Slave Stack Code v5.10 and AM335x SDK v1.00.00.08 and I can build the full ethercat application with neither TI's patch nor Beckhoff's SSC Tool.When I try TI's patching method, it...
View ArticleF28M35H52C1 programming into flash issue
Hi,i got F28M35H52C1 CPU from TI as sample, i assembled this on my PCB and i written test code to blink the LED which is connected to the GPIO135, if i burn the code into RAM it was working fine, but...
View ArticleClik here to view.
dm368 boot from sd card
Hi,I have dm368 board. by default, board booting from nand. I have erased all nand.according tms320dm368 documentation:Boot Modes Overview - If NAND boot fails, then MMC/SD mode is tried.i've made sd...
View Article