wl1271 on a dm8148 in AP mode, need help
I'm using kernel 2.6.37 on a dm8148-based platform with a wl1271 tiwi module connected to the processor via sdio. I'm able to use the default kernel module for the wl1271 in order to get station mode....
View Articlebq76pl536evm-3, circuit 3 is reading voltages incorrectly.
Circuit 3 on my bq76pl536evm-3 board has been working fine for awhile now that I have been using it. I have been using a 4 channel power supply to put a voltage on each circuit while learning to send...
View ArticleADV7180 Hardware Reset
Quick question on the ADV7180. Do the data output signals go high-impedance when the RESET pin is held low? What is the state of these pins during hardware RESET?
View ArticleCD4536B COUNTER TIMER
Dear AllI have the following questions regarding the CD4536B counter timer IC:1) The 'CLOCK' for this IC can be made from externally connected 'R' and 'C' to appropriate pins. This part is available...
View ArticleCC112x temperature sensor
CC112X Temperature sensor parametersTemperature sensor fitted from-20 to 80°CEffect of supply voltage deviance1,17mV/ VDD-VEffect of supply voltage deviance0,44°C / VDD-VTable 1: Temperature sensor...
View ArticleF28235 ADC Mirror Result Register problem
I encountered a problem with ADCRESULT registers on C2000 TMS320F28235.When I use AdcRegs.ADCRESULTx, there is no problem, just requiring >>4 bits to get the correct value.When I tried using...
View ArticleIs the MSP430F5438 washable?
Hello,Is the MSP430F5438 a washable component, and for future TI products where do I look to verify that the parts are washable? I did not see it in the datasheet, but perhaps I missed it.Thanks...
View ArticleError: Can't modify read-only field
Hi,I have got an error when compiling project:------------------------------------------------------------------------------------------------------------Can't modify read-only field Correct any script...
View ArticleGerman dictionary for spell checking in CCS V5.4
Where I can get a german dictionary for spell checking in CCS V5.4? I didn´t find a hint, what format of dictionary CCS is using.Do you have a downloadlink for me?
View ArticleIssue with RX of McSPI1 reading 0's
Hi TI,For admins >>> I'm sorry, opened the same post under the Stellaris forum accidentallyMy CPU: AM3505, board is my final product board, not EVM3517.Problem: having an issue with RX of...
View ArticleUnusual application of ADS1281EVM-PDK
I am attempting to use the evaluation board and software to talk to my board that has the 1281 installed, but not all its signals exposed. I removed the 1281 from an EVM daughter board and with jumpers...
View ArticleClik here to view.
PWM problem
Hi, We're working on a project involving control of a BLDC from Faulhaber (3564) with rather low inductance. When loading the motor (sensored, velocity control) a ticking sound appears. I tried to take...
View Articlebq27541-g1 chemistry flash data update
Hello,I am evaluating bq27541-G1 and I read that there are some chemistry data in the flash that are updated when the chemistry ID is changed using bqCONFIG software. I understand that these chemistry...
View ArticleJTAG Debug --terminate without run, will the program run after terminate?
HiProblem description: CPU is AM3352. In CCS Debug with JTAG, after debug project (if run this project, will change FLASH), then terminate without run, FLASH will still be changed.Question 1: After...
View ArticleADS1118 Single Ended Input Impedance
Hello,What is the input bias current/input impedance of the ADS1118 when configured in single ended input mode? I didn't see that info in the datasheet.Thank you very much!
View ArticleUCD3138CC64EVM-030
Does anyone know the exact dimemsion for the UCD3138CC64EVM-030, specifically the distance between J3 and J4? Thanks.
View ArticledMAX register access during transfer in progress
Hi,I would like some clarification on the note in the TMS320C672x (dMAX) Reference Guide:"It is not recommended to access the active register set, indexes, reference counter (within the transfer...
View ArticleInputs to ADS6445EVM and Altera FPGA interfacing
Hello,I'm looking for an ADC that will pair with my Altera dev board through the HSMC port. I'm considering the ADS6445EVM or any other EVM as long as the ADC has a 14 bit resolution, 500k sps (all of...
View ArticleGetting Started
Hello all! New to forum as well as TI's MSP430x platform. I have some experience with Arduino's wiring language, but the simple examples i found within CCS (blink the LED and Hello World) look pretty...
View ArticleQuestions about Cameras for DLP LightCrafter
Hi, I am a newer with DLP LightCrafter. I want to start a new project with DLP LightCrafter for 3D pictures of teeth, but I didn`t find the useful information about what kind of camera can use for this...
View Article