Quantcast
Channel: Forums - Recent Threads
Browsing all 262198 articles
Browse latest View live

DRV8312-C2-KIT: What configuration settings must a change in the DRV8312EVM...

Part Number: DRV8312-C2-KITWhat configuration settings must a change in the DRV8312EVM to be able to lower the PVDDIN Voltage from 24V to 12V?When I lower the PVDDIN voltage below 18.5V the motor stops...

View Article


CC2640R2F: Sensor Controller : COMPA with DCOUPL as Reference triggers at...

Part Number: CC2640R2FHi Champions,I made a very simple sw on SCE with the aim to use COMPA  to trigger a battery fault .I'm testing the code through the SCS in task debugging on a LaunchXL-CC2640R2F...

View Article


TPS7A66-Q1: Thermal Pad Dimensions

Part Number: TPS7A66-Q1Hi E2E,Good day,We have a customer seeking for the thermal pad dimensions of TPS7A6650QDGNRQ1, in HVSSOP (DGN) package. Hoping for your assistance on this.TPS7A66-Q1:...

View Article

TPS25810: combination with TPS2547, how to do load sharing?

Part Number: TPS25810Team,I have a dual USB charging application with one USB-C and one USB-A port. For this TPS25810 and TPS2547 should be used. Current limitation needs to be as this:If only on USB-C...

View Article

Image may be NSFW.
Clik here to view.

AWR1243: LVDS Protocol understanding

Part Number: AWR1243Hello,For AWR1243, in the datasheet, pin M15 and M14 is described as differential debug port 1. (shown below)However, the same pins in AWR1443 datasheet is described as LVDS_FRMCLK....

View Article


ADS1278-SP: ADS1278 DGND to AGND 10E @pin34.

Part Number: ADS1278-SPHi Team,One of my customer is having issue with DGND to AGND resistance, in the device the resistance @pin 34 (DGND) to any AGND pin is 10E. Is this correct?( The device is...

View Article

Image may be NSFW.
Clik here to view.

TMS570LC4357: TMS570LC4357 - HTU not working

Part Number: TMS570LC4357Hello,We are migrating code from TMS570LS3137 to TMS570LC4537 and my HET/HTU module doesn't work on TMS570LC4537. I'm setting the VCLK to 75MHz, HCLK 150MHz and High Res Clock...

View Article

CCS/CCSTUDIO: Slow CCS build (+ freezing UI)

Part Number: CCSTUDIOTool/software: Code Composer StudioBuilding the same project with my colleagues, a project re-build takes over 5mn on my PC and 1mn for them.This timing is on CCS8 but I have...

View Article


RM46L852: MIPS or DMIPS comparison among Hercules, Concerto, and Delfino TI...

Part Number: RM46L852Hello,    I am currently involving three TI products as Hercules microcontroller, Concerto, and Delfino DSP.  I understand they are targeting different applications but would have...

View Article


AM4377: No any console output

Part Number: AM4377Hi, We designed our own AM4377 board. The power solution is descrete power solution. With boot mode 11001, we can see 0x43 output from UART0, which means trying to boot from UART0....

View Article

Image may be NSFW.
Clik here to view.

DCA1000EVM: DCA1000 mmWaveStudio 2.1.0.0 can't read FPGA version while...

Part Number: DCA1000EVMI am running mmWaveStudio 2.1.0.0, but while on the "Connection" tab, I load BSS and MSS images bin files from the 2.0.0.2 mmwave studio firmware directory because for some...

View Article

LM5119: Currnet Balancing with LM5119?

Part Number: LM5119Hi,my assigned customer wants to use LM5119 in this configuration:dual phase, Vin = 18V..60V, Vout = 12V, I_load_cont = 12A, I_peak = 16AThey tested the EVM and noticed, that the...

View Article

TUSB321: Rp pullup resistors for CC1, CC2 pins

Part Number: TUSB321Does this IC include the Rp pullup resistors for CC1 and CC2 pins or should they be added to my PCB?

View Article


CCS/MSP430FR5969: Capturing an external signal and output by serial port.

Part Number: MSP430FR5969Tool/software: Code Composer StudioHello,as I posted a week ago, I want to mesure an external wave signal and capturing the increase value of the timer. Once I achieved that, I...

View Article

DS90UB954-Q1: DS90UB954-Q1 Test and Debug Registers

Part Number: DS90UB954-Q1Where can I find a register description of the Test and Debug registers listed in Table 183 of the datasheet?Harry

View Article


TPS25942L: Fualt Flag behaior TPS25942L

Part Number: TPS25942LHi, I have a case or behavior that shows at my customer, that they would need consultation or a confirmation from our side:------------------------------------------They are using...

View Article

DS160PR410: EEPROM size question

Part Number: DS160PR410Can the AT24C16C EEPROM be used with the DS160PR410?  App note SNLA320, Understanding EEPROM Programming for the DS160PR410" indicates in Table 5, Byte 0, Bit 5, that an EEPROM...

View Article


TPS65983B: Configuration tool is needed for non-Thunderbolt application

Part Number: TPS65983BHi,We would like to use the tps65983b instead of the tps65981 or tps65982, since PD 2.0 will be no longer supported soon in the USB certification process. I have not found any...

View Article

Image may be NSFW.
Clik here to view.

CCS/CC2640R2F: How to make Sensor Controller to put Sleep? AND Problem...

Part Number: CC2640R2FTool/software: Code Composer StudioHi ,I have integrated the sensor controller program  to custom CCS Project as per document says in SCIF output directory  ( i.e.,...

View Article

Image may be NSFW.
Clik here to view.

LM5145: Circuit and Evaluation Kit Questions

Part Number: LM5145Hello,We are working on a design with the LM5145 and had some questions:Why are 2 net ties shown in the eval kit schematic, but not seeing them on the Eval Kit PCB?Why are “NC” (no...

View Article
Browsing all 262198 articles
Browse latest View live