LM3S9B81 Comparator problem(s)
Hi,I am using the ADC on a LM3S9B81/Rev C5 on a board that we developed. Here is what I want to achieve:- set up the adc to measure voltages and send it out on CAN-bus (works)- set up the digital...
View Articleconnecting two TMS570LS20216SPGE via sci
I am trying to get two TMS570 usb sticks to communicate as master and slave. the master will send a single "go command" and the slave perform a task and send back the results. I though I could use the...
View ArticleTMP006 register 01h problem
Hi,I have used hot gun to mount 6 TMP006 chips on my new boards. The hot gun is Steinel 3483. It was set to 310 degree. Solder flux was applied before soldering. The flux type is Alpha NR-205. The flux...
View ArticleMSP430G2553.h Header File
As a brand new user, I am working through the Launchpad Student Guide that instructs me to look for the MSP430G2553.h file on my hard drive. The file is not there. Anywhere else that I can get a hold...
View ArticleTransfer of uImage from TFTP server fails with the RAM address mentioned in...
I use the following link to set up kernel booting from SPI flash :http://processors.wiki.ti.com/index.php/Booting_Linux_kernel_using_U-BootHowever, I am stuck at the point :U-Boot> tftp 0xc0700000...
View ArticleDM814x run xfreerdp with RemoteFX issue
Hi，Anyone has experience on running xfreerdp with enabling RemoteFX dec on DM8148?I already installed TC-RDK 1.0 RC3 from TI and setup rfx modules by following the userguide. But when I run xfreerdp...
View ArticleKentec 7" LCD on EB-LM4F232-LCD - Help
Hi , I am trying out the demo program provided by Kentec website to interface the LCD driver K70DWN2 onto the EB-LM4F232-LCD interface board.It's not working and the drivers linking don't seems to be...
View ArticleClik here to view.
Issue for #error Unrecognized COMPILER!
Hi,I try to build the showjpeg project from StellarisWare (rev 9453). I am using DK-LM3S9D96 kit and the CCS 5.3. It is working if I build it from Project > Import Existing CCS Eclipse Project...
View ArticleHow to get the Control Console for TAS5548EVM?
Hello,I got thehighly anticipatedPCBTAS5548EVMfinally.Unfortunately I can notdownloadthe necessary software.At my requestI'vereceived no response yet.What canI do togetthe Control Console as quickly as...
View ArticleCC1101 Latch Up ?
We have most likely triggered a latch-up problem on the CC1101 antenna pins. It has triggered a latch-up resulting in a permanent current of approximately 230mA. This current is limited by the LDO...
View ArticleTSW1200 VHDL Code
Hello,I've seen numerous posts about obtaining the VHDL/Verilog code for the TSW1200 but it seems to be supplied on a request basis. I am using the TSW1200 with an ADS5463. Can I get the VHDL or...
View Articlewatchdog on AM335x?
Hi,I'm now evaluating Cutsom AM335x board with our linux EZSDK 5.05.I have 2 questions about watch.1. enable watchdogI just installed EZSDK5.05(and run setup.sh). From booting log, I can find...
View ArticleSquare-wave superimposed on staircase ramp
Hello,What is the easiest way to generate a square-wave superimposed on a staircase potential ramp using an MSP430; with the ability to set the start and end voltage?I also need to be able to take a...
View ArticleHalCoGen - prefix and/or postfix for generated file names
Hi there,I would be happy, if I had the possibility to change the names of the files,that HalCoGen is generating.Two simple HalCoGen-Project-Parameters like- "Generated file name pre-fix"- "Generated...
View ArticleCCS 5.3 does not provide accurate CPU load values
Good day,I have the following setup:- CCS 5.3- DSP/BIOS 5.42.0.07- Spectrum Digital USB XDS560v2 STM emulator- C6748 targetI'm having trouble getting regular logs out from LOG_printf's and I have also...
View ArticleDVR RDK Multichannel Encoder Use case Link API
Hi, Thanks a lots to this forum, I could successfully realize many RDK use cases. I want to realize one more, Multichannel Encoder using Link APIs. (File Read -> ENC -> File write). 16 channel...
View ArticleUnresolved symbol, but all include paths are definend
Hi,I tried to compile a project using the driver lib sysctl but the built failed. I got the following errors:undefined first referenced symbol in file --------- ----------------...
View ArticleMSP4305529 Windows7 64-bit CDC USB Host Signed Driver Question
I am using a MSP430-5529 for a USB project. We are trying to use a Windows7 64-bit as our CDC USB host (Virtual Com Port) using the MSP430_CDC.inf generated from the Descriptor tool. From what I...
View ArticleCCS5.3 and CCS5.4 Problem
I am currently using CCS5.2 to develop some important projects.I installed CCS5.3, but when it starts a popup window show me "An error has occurred. See log file...
View ArticleAIC34 EVM Headset Detection.
Hi:Headset detection is not working on the AIC34 EVM. I am able to loop data from an external microphone to a headphone. I have headset detection enabled on the EVM GUI; however, whether I plug in or...
View Article