Part Number:TMS320C6748
Tool/software: Code Composer Studio
We have bought TMS320C678EZWTD4E，but we can not unlock the Boot to enter debug mode , can not connect to jtag.
The omapl138_c6748_generic_security-1.0.2-setup.exe software was downloaded, but it could not be opened after installation.
The DSP in the circuit board did not extract any serial pin, so there is no way to decrypt it at present.
Is there proper software do the jtag unlock? Or is there any solution?
Best regards
Part Number:TAS5766MDCAEVM
Hello Sir,
I already download PPC3 and already had PurePath Console MotherBoard & TAS5766MDCAEVM
but when I start installed EVM APPs and download the update.
It's seems need to additional approval?
My TI account is kimbrel.lee@jazzhipster.com.tw
Please check it. Thanks!
Part Number:AM4376
Tool/software: Linux
Hi, we got some LED issue with AM4376 this IC when we tried to restart in Linux system.
We designed the MB with AM4376 and our LAN IC is KSZ9031RNX as recommanded, it works fine for every time we boot the system, also the LED from the LAN port is normal,
but when we try to restart the system, some of LAN port LED will keep Flashing (We found the same issue happened with TI development board as well)
Do you have any solution for this issue?
By the way, can you let me know how to change the definition of LAN port LED?
For example, when it link up --> Light on and during communication --> LED Flashing
Thanks for your help!
Part Number:TDA2EVM5777
Tool/software: Linux
I want to be on a Linux system
use USB Storage in TDA2EVM5777 USB otg
it can't work
Part Number:TMS320F280049C
Tool/software: Code Composer Studio
I designed a GUI composer standalone desktop app using GUI composer v2.0.
When I run the standalone desktop app with my PC connected to the Internet, there is no problem.
But, in case I run the standalone desktop app with my PC not connected to the Internet, the message "Hardware not Connected" appears and the system does not work.
Does the standalone desktop app need my PC to be conneced to the Internet?
If so, why does a standalone desktop app need the Internet?
Part Number:CC2560B
Hi,
We are planning to use Panasonic's ENW89823A3KF BT module in our design to provide BT connectivity to an android device. The module has TI's CC256x BT controller.
Our host controller which will interact with this BT module over UART is NXP's kinetis K60.
As per our understanding the stack needs to be integrated in our host Controller. Please confirm. If yes, what would be approximate memory requirement for same if we use basic profile like SPP only?
Part Number:TDC7201
Hi Team,
Would you share your mailing list for sending email because
I'd like to ask questions with confidential information?
I have already created another thread and received a friend request.
However, I have not received mailing list yet although I accepted the request.
Thanks,
Hiroshi Yuasa.
Part Number:PROCESSOR-SDK-AM65X
Tool/software: TI-RTOS
Hi,
We would need to use MSI interrupts with TI-RTOS and the R5 processor, but in the pcie_sample source code (am65xx\src\pcie_sample_board.c) we have seen a comment that states that “no interrupts can be sent to R5”. Is this comment right?
Is there a workaround for having MSI interrupts working with the R5 processor?
When will be the MSI interrupts supported for the R5 processor?
Thanks for your support.
Best regards,
Ismael Pérez
Part Number:CC2541
Hi,
I it possible to send more than 20 bytes of data over notification using BLE Stack BLE-CC254x-1.4.2.2.
As when i am send 20 Bytes it is working properly but when i am sending 21 bytes data is not coming.
#define SIMPLEPROFILE_CHAR4_LEN 21
VOID memcpy( (void *)arr_rx_uart, "Abhishek Sharmakumar1", SIMPLEPROFILE_CHAR4_LEN );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, SIMPLEPROFILE_CHAR4_LEN, (void *)arr_rx_uart);
it is working when i am setting #define SIMPLEPROFILE_CHAR4_LEN 20
Part Number:BQ25890
Dear Support team,
If D+/- is disconnected or switched with other USB connection during the battery charge, will the charge be terminated?
Best Regards,
Hirokazu Takahashi
Part Number:CDCLVC1103
Hello, I am looking for a fan out buffer with 3 or more LVCMOS outputs. My input is a clipped sine from a TCXO. Will this device handle this type of input?
Part Number:ADC12DJ5200RF
In ADC12DJ5200RF datasheet, power consumption for different JMODEs are not provided. Kindly let me know the power consumption(& supply current rating) of ADC for JMODEs from 31 to 39.
Part Number:TMS320C6657
Tool/software: TI C/C++ Compiler
The DSP model C6657 uses the same source code, Link files, compilation options, etc. Using 8.3.3 version compiler to compile program in Windows operating system and Linux operating system, the final compilation product .hex are quite different. The function of downloading programs to chips is the same. The assembly files generated by the source code under the two operating systems are the same. The intermediate product. o files are quite different. Is the final compilation product .hex different under different operating systems?
Part Number:CC2640R2F
Hi,
i'm trying to program an cc2640r2f board through an XDS110 debugger dev. pack. board using uniflash programmer if i tired to do this, iam facing error like
Tool/software: Code Composer Studio
Hello,
How CCS can help to automatically generate documents like DoxyGen?
Part Number:TAS5766M
Hi Sirs,
If customer reduce the TAS5766's hardware gain from 20dB to 14dB (0.5X) , can we increase thermal limit for 4X power (for example 0.632W to 2.53W Cont) in PPC3' SOA to achieve the same output level without speaker damage?
Thank you and Best regards,
Wayne Chen
05/22/2019