Launchpad instructions a mess
Seems like instructions I am finding for the use of the LM4F Launchpad were written with StellarisWare in mind, but the latest StellarisWare download now seems to lack the support for the LM4F chips....
View ArticleMicrocontroller
i need a micro controller that has only 1 or 2 I/O pin/s with a 10bit resolution. cost not important.
View ArticleSequence waveform data of LM5116
Please teach us about LM5116.Is there the sequence waveform data (including EN,Fsw) of the input and output voltageand protection function (UVLO function, OverCurrentProtection function, SoftStart...
View ArticleNew install of CCSv5, eclipse runs, no 430ware
Previously downloaded CCSv5 on my workstation and everything works fine: eclipse, and all of the TI online help for MSP430. Then I downloaded CCSv5 to my laptop, running an i5 and Win 7. Eclipse runs...
View ArticleWhere is Stellarisware driverlib for LM4F120XL?
In Launchpad workshop ch2 steps 5 and 6 we enter links to set the build options. After completing the steps I get errors.After a little investigation I found that folder 'ccs-cm4f' does not exist...
View ArticleWhich peripheral to use to output serial MIDI signals? (using the C5535 eZdsp)
Hi,I am using the C5535 eZdsp, and after doing processing on some input audio signal, I would like to output a digital MIDI signal from the board. MIDI is a digital communication protocol used for...
View Articlehow to display data using graph menu??
hello ,my board is 6678Le,my ccs version is CCS5.3. i want to use the graph fuction to display data which is defined from my project . int x[4096]={...} the dot in the "{}" denotes sinewave data i...
View ArticleVCP auto-connection
Hi:I am trying to bring up a C2000 for a brushless dc motor (BDCM). When I launch the GUI DRV8312GUIv2 I receive an error message "VCP auto-connection is enabled, but no ports are available." There...
View ArticleTest/Learning Platform from T.I.
Hi:I am a user and maintenance technician with Christie, NEC, and Barco DLP Cinema projectors. I would like to learn more about the software that controls them, and the hardware of the DMD device....
View ArticleBlank screen when doing initial boot for both Android and Linux SDs
Hello,I just received my AM335x starter kit and followed the directions in the quick start guide, but once I hit step 7, booting the OS, nothing ever comes up on screen. I see that the screen is...
View Articleis possible to output hdmi and composite simultaneously?
hi,is possible to output hdmi and composite simultaneously?enviroment: - board : dm8168 evm - ezsdk ver : ezsdk_5_05_02_00 - omx ver : omx_5_02_00_48 - sample code :...
View ArticleClik here to view.
dm8148 uboot splash logo issue
Hi!I am using a dm8148 processor with some kind of LCD. I managed to add the backlight and to display a bmp on the LCD at the uboot level. But, The image is flickering and i can't figure out what are...
View ArticleWhere is the link for OMAP L137 example projects?
Hi,I'm completely bewildered by the organization of this website, so forgive for my naivety. When I was working with the C6713 DSK, I could relatively find the example projects for it, but for the...
View Articlei2c controller timed out after ./load_c6xdsp.sh
Dear Experts,Env: dm8148/dvrrdk 3.5/custom boardI use a rtc on i2c-2, when kernel boot up, I can read date/time from RTC by "busybox hwclock":Tue Jan 1 00:42:38 2013 0.000000 secondsBut after I...
View ArticleOPA380 with photodiode operation
Hello friends, I have connected the circuit as per Figure 6 - (a) page:12, in OPA380 datasheet(http://www.ti.com/lit/ds/symlink/opa380.pdf). It is working well and good. But i have reversed the...
View ArticleG3-PLC + TMDSPLCKIT-V3
G3-library of a TMDSPLCKIT-V3 based on F28069 provides to change the start tone frequency and the number of carriers at a G3-OFDM-signal. I'd like to reduce the frequency spacing between the G3-OFDM...
View ArticleTPS40170 high side FET damaged
I had some SMPS's using the TPS410170 fail testing in a production run. Some of these have the high side FET damaged. I don't have the full information yet as our production is done in a different...
View Articleintegrating fire wire camera using PCIe interface
Hi I am presently working on spectrum digital ti 816/389 evm board. I want to integrate fire wire camera to the board. For this i am using pcie to firewire interface.but i am unable to do that. As i...
View ArticleImporting a new project into CCSv4. Urgent help required..
By using Embedded Code Generator, I made an auto code for a simple clock out program. But am not able to import that project i made using matlab R2012b into CCSv4 for its building. Could any one...
View Article