I have firmware and software package 2.0 from the TI page installed, and when I connect the Lightcrafter to a windows 7 computer via USB, it shows up under network adapters as an RNDIS gadget with a yellow warning. I then attempt to update the driver following the steps outlined in the users guide, which results in a code 10, device cannot start, error. I understand that this was an issue several months ago but was under the impression that it had been resolved with v1.1; is there something I'm forgetting/other things I might try? This device has connected without issue on other windows 7 systems, so I doubt it is a hardware problem.
↧