Hi community
I have received today a brand new AM335x EVM from Texas Instruments.
Build the BSP:
- Downloaded & installed the WINCE ARM-A8 02.30.00
- Open C:\WINCE700\OSDesigns\AM335X_OS\AM335X_OS\AM335X_OS.pbxml
- Switch Configuration to AM33X_BSP_ARMV7_Release
- AM335X_OS -> Advanced Build Commands -> Sysgen
Default setup of switches for the AM335x EVM to boot from SD Card:
- SW3/SW4 DIP switches: 1111 1101 / 0111 1111
- SW6 DIP: All DIP off (0000)
Connection:
- Connect Serial Cable to UART0 (next to the power switch)
Then I have formatted the SD Card that it can be read by the processor. Copied MLO, Ebootsd.nb0 & nk.bin to SD Card.
However, MLO is executed but fails to execute ebootsd.nb0.
The serial ouput looks like this:
Texas Instruments Windows CE SD X-Loader v0.0.0 for SubArctic 33X
Built Mar 8 2012 at 07:32:41
Version BSP_WINCE_ARM_A8 02.30.00.03
open ebootsd.nb0 file
Init HW: controller RST
SDCARD: requested speed 1000000, actual speed 1000000
SDCARD: requested speed 25000000, actual speed 19200000
read ebootsd.nb0 file
jumping to ebootsd image
Can you tell me what I am doing wrong?
Do I have to erase / prepare the flash in order to boot from SD Card?
I have attached my generated MLO & Ebootsd.nb0, could someone please verify that they are correct?
Thanks in advance!
Michael