Hi TI support team.
Please recommend a GPIO mode configuration for the following application using the SN65LCP114. The description on the datasheet is not detailed enough for me to make a judgment.
The SN65LCP114 is used to branch out the SFI signals. The 2 repeater solution is as follows.
IC --- (10 inches FR4) àrepeater à connector--- (3 inches FR4) --connector à repeater --- (10 inches FR4)à IC
The strapping pins including:
DRV_PK#/SCL
VOD/CS
EQ0/ADD0
EQ1/ADD1
EQ_MD/ADD2
GAIN