Part Number:TPA3113D2
Hello,
I am having a strange issue where when I apply power to my circuit, if my input volume is set to minimum (zero) the TPA will shut down and not restart. If I apply power with the volume turned up slightly operation is fine and I can then set the volume to minimum with no issues.
thanks,
Part Number:PGA411Q1EVM
Hello ,
I can see that for PGA411Q1EVM resolver to digital converter that Exciter frequency (10 to 20 kHz), but ı want to use 5 kHz for Exciter ( ref+ ref- coil terminals ). Can this PGA411Q1EVM module provide that frequency? Excatly I want to use Exciter frequency from 1 kHz to 10kHz.
Best Regards
Ömer Özden
Servo Motor Test Systems
Part Number:MSP432P401R
Hi
I have found some posts to the effect that there is no example code for the display I bought with my l launchpad.
There is some talk about an older example but it is not clear where to find the example and how to run it.
It sounds like this has something to do with SimpleLink. What is SimpleLink do I need it and how would it avoid it.
I tried a MSP430FR5969 a few years ago with CCS v8 and I do not remember the term SimpleLink from then.
Thanks
Chris
Hi team,
My customer is looking for 4-channel, 5V supply analog switch that can support up tp 30MHz. What part should be the best recommendation? Thanks.
Regards,
Patrick
Part Number:TPS92692-Q1
Hi team
I was designed below.
My schematic produced three defects. (total 20)
Could you check the schematic?
hello
I programing bq40z50-r1 with "bqProduction Smart Battery Builder" software
after programing passed successfully ,Then at a zero current test I saw there was a current between 8-10 ma
In the software --> "calibration Type" i choose Boar offset Who had to help me with the calibration but it not
when i made manualy ""cc offset" it help and the current saw 0 ma
And another thing that makes it difficult for me to perform the calibration correctly is that the designated software
does not have the option to perform ""cc offset" .
How can I avoid this problem in the future because my burning process is automatic?
Is there any new software of "bqProduction Smart Battery Builder" or Can be add the "cc offset" function In existing software?
Please, your reference
Best Regard
Rafael.B
Part Number:DP83848I
Dear Sirs,
My customer asked us about connection of DP83848i.
He wants to know the connection propriety to the backplane at a later stage of the slave side PHY.
We have received a request from customers to connect on the backplane without using a pulse transformer.
He wants to connect the master and the slave with a backplane instead of connecting them with a cable.
The connection is as shown below.
Please tell me whether it is possible for your request, and if possible, how to do it.
Best Regards,
Y.Hasebe
Part Number:CC1350
We are presently using the CC1350 powered 1.8V with a single-ended configuration for a 868MHz and 2.4GHz output (external bias). What is the expected current consumption during TX and RX for this configuration? Do you expect a differential output with 3dB back-off to consume more current than the single-end output described?
Part Number:MSP430G2553
guys can anyone provide the code for msp430g2553 for interfacing an i2c device(BME680/BME280) any one of them
Part Number:PROCESSOR-SDK-AM57X
Tool/software: Linux
I have build the tisdk several times before and this was always working without issues.
But since this weekend I can't build it anymore. Normally I do "MACHINE=am57xx-evm bitbake core image-minimal"
But it gets stuck on a do_fetch of ti-cgt-pru-2.2.1.
So i did: "MACHINE=am57xx-evm bitbake ti-cgt-pru" and I see that wget can't download the file from the TI site.
I also tried it manually with the wget command but also this is failing. I can download the file with my Firefox browser but wget is failing. I see it is redirected to another download site but it fails after a timeout.
I don't use Ubuntu but I tried several machines that all worked before. To me it looks like an issue with the TI website.
Part Number:CC3220MOD
Hello experts,
We want to know whether the mentioned behavior could be avoided.
Could you tell us the following statements are defined as a 802.11 standard?
- Null packet is sent from CC3200MOD to go into the power save mode.
- The prediction which consumed 100mA in 50-60ms couldn't be off.
Best Regards,
Nomo
Part Number:DRV10983
Hi
Our customer wants to implement circuit that can detect direction of motor which is spun by external torque.
I think it is possible to determine by monitoring phase of two different FG signal.
However, I have no such a reference.
Do you have any reference or other solution?
BestRegards
I need to use some light dimer IC package with the suggested circuit which will be controlled by the wireless Light sensor using creating the mesh network for a smart street light system.
Any pieces of advice on this will be much help.
Part Number:TMS320C6713B
Dear All,
I am working on DSK C6713 DSP kit when i connect power cord to it only power LED (D3) is getting on all other LED's like Busy (DS201) , User LEd's are not even glowing and when i try connecting with CCS it is showing emulator error, please suggest me how to proceed further to solve the issue
Regards,
Hussain
Part Number:TMS320F28379D
Tool/software: Code Composer Studio
Dear support,
We would like to communicate with FPGA via SPI/DMA - same as it is done in Example_2837xD_Spi_dma.
in Control card all work good, but I don't understand why there is no calling of InitSpiaGpio() function?
Which GPIO is configured for SPI_A. I would like to see in the scope clock, chipSelect, dataIn & datsaOut .
Or I missed something here...
Thanks,Sabina
Part Number:AM3358
Hi,
I have a question from my customer for detailed information about EtherCAT slave bug (PINDSW-2636) fixed in v1.00.06.
http://processors.wiki.ti.com/index.php/PRU_ICSS_EtherCAT_Release_Notes#Fixed_Issues
Usually such information is available below wiki document, but PINDSW-2636 is not written. And it seem the wiki is now read only.
http://processors.wiki.ti.com/images/9/92/EtherCAT_Slave_Errata_PINDSW_01_00_06.pdf
Could you update the document and add PINDSW-2636 info.?
Thanks and regards,
KoT
Hi all, I'm working with cc13xx TI-RTOS and I develop a project for the communication between cc13xx device. Now I see on internet the possibility for communicate in long rage and I found the table, that I change the kbps and I transmit in long rage. How can I change the kbps in my device through TIRTOS?
Part Number:UC3845
In the datasheet P3 Device Comparison Table.
UVLO of UC3845 was described Turn-on at 8.4V and Turn-off at 7.6V.
On the other hand , in P8 Electrical Characteristics .
It seems like there are 2 type of spec. Turn-on typ 16V & 8.4V and Turn-off 10V & 7.6V.
Which is correct spec ? Are these value Turn-on 16V and Turn-off 10V typo ?
Part Number:TMS320F2808
Dear all,
We found the GPIO0 output 2ms glitch during power on, here is the scope:
CH1 is 1.9V, CH2 is GPIO0, CH3 is 3.3V
Here is my SCH:
Do you have any suggest?
Thanks.
Cai
