Quantcast
Channel: Forums - Recent Threads
Viewing all 262198 articles
Browse latest View live
↧

DRV8312-69M-KIT: Regarding Level 6 PID tuning

November 25, 2019, 9:16 pm
$
0
0

Part Number: DRV8312-69M-KIT

We are referring "Trapezoidal Control of BLDC Motors Using Hall Effect Sensors" pdf. Now we are performing Level 6.

While performing Level 6, for speed control we need to tune PID gains. After tuning the gains as attached below, the motor is rotating with the specific speed provided using term "SpeedRef", but the motor is making some noise and not rotating smoothly.

Also, we have referred the document "PID Controller Tuning Guide.pdf" regarding PID Tuning from "C2000Ware_2_00_00_03".

Can you let us know the value of gains to be tuned, so that motor rotates smoothly.

↧
Search

TMDX654GPEVM: AM6548 PRU_ICSSG RGMII throughput

November 25, 2019, 9:25 pm
$
0
0

Part Number: TMDX654GPEVM

Hi Robert,

We have custom designed a development platform based on AM6548 SoC. This platform is designed to support two Gigabit Ethernet ports via PRG1_RGMII1 and PRG2_RGMII2.

We have followed the series termination on TX and RX lines as per the recommendation. PRG1_RGMII1, PRG2_RGMII2 is connected to 1.8V and 3.3V IO levels respectively.

Here are our observations on RGMII port validation:

1) Single port loop back on MDI interface is working fine at 1Gbps. (Cable loop back)

2) Port to port loop back at 100Mbps is working without any throughput issues.

3) On few of our development platform, Port to port loop back at 1Gbps is failing to transmit few packets of data. With diagnostic code, on transmitting 300 packets of data we observed PRG2_RGMII2 receives 294 packets, missing 6 packets. Also, we have tested with various delay settings on RGMII_RX_DELAY_CTRL register. Hardware strapping option is designed to set delay to 2nS.

As stated in the above query, does operating at 3.3V cause throughput issue. 

Could you please share your thoughts on this.

Warm Regards,

Navya

↧
↧

MSP430FR6043: Where do I get MSP430FR6043 Demo code

November 25, 2019, 9:29 pm
$
0
0

Part Number: MSP430FR6043

Hi,

 Where Can I get MSP430FR6043 Demo code to measure Water /gas flow.

Request to share the link.

Regards,

Suhas

↧

Compiler/TDA2PXEVM: cannot open source file "ti/ndk/inc/netmain.h".

November 25, 2019, 9:31 pm
$
0
0

Part Number: TDA2PXEVM

Tool/software: TI C/C++ Compiler

Hi,

I am using PROCESSOR_SDK_VISION_03_05_00_00.

Project is created but i am facing problem while build/compiling. 

Below is the compilation data. kindly help asp.

I am pin pointing the first error.

PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/links_fw/src/rtos/utils_common/include/network_api.h", line 87: fatal error: cannot open source file "ti/ndk/inc/netmain.h"

root@bhagyashree-Latitude-5490:/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build# make -s depend
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
mkdir: cannot create directory ‘/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/links_fw/include/config’: File exists
mkdir: cannot create directory ‘/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/links_fw/include/config/apps’: File exists
mkdir: cannot create directory ‘/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/links_fw/include/config/apps/tda2px_evm_bios_all’: File exists
# makeconfig: Config is [ tda2px_evm_bios_all ]
# makeconfig: Output file is @ /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/links_fw/include/config/apps/tda2px_evm_bios_all/system_cfg.h
# makeconfig: Input  file is @ /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build/configs/tda2px_evm_bios_all/cfg.mk
# makeconfig: Generating header ...
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
# makeconfig: Generating alg plugin config ...
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
# makeconfig: Generating usecase config ...
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
# makeconfig: Generating footer ...
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
# makeconfig: Done !!!
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
#
# CPUs that are NOT required but included in config [ tda2px_evm_bios_all ],
#
# WARNING: IPU1_1 can be excluded from application
# WARNING: IPU2 can be excluded from application
#
# CPUs that are required but not included in config [ tda2px_evm_bios_all ],
#
#
# Edit /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build/configs/tda2px_evm_bios_all/cfg.mk to include or exclude CPUs in an application
#
Nothing to be done for tda2px ipu1_0 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px ipu1_0 sbl_utils
Nothing to be done for tda2px ipu1_0 vps_osal_tirtos_smp
Nothing to be done for tda2px ipu1_1 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px ipu1_1 csl
Nothing to be done for tda2px ipu1_1 csl_utils_common
Nothing to be done for tda2px ipu1_1 csl_uart_console
Nothing to be done for tda2px ipu1_1 csl_utils_i2c
Nothing to be done for tda2px ipu1_1 pm_hal
Nothing to be done for tda2px ipu1_1 pm_hal_optimized
Nothing to be done for tda2px ipu1_1 pm_lib
Nothing to be done for tda2px ipu1_1 pm_lib_optimized
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px ipu1_1 sbl_lib
Nothing to be done for tda2px ipu1_1 sbl_utils
Nothing to be done for tda2px ipu1_1 diag
Nothing to be done for tda2px ipu1_1 firewall_l3l4
Nothing to be done for tda2px ipu1_1 norflash_lib
Nothing to be done for tda2px ipu1_1 qspiflash_lib
Nothing to be done for tda2px ipu1_1 i2c_lld
Nothing to be done for tda2px ipu1_1 stw_platform
Nothing to be done for tda2px ipu1_1 stw_uartconsole
Nothing to be done for tda2px ipu1_1 stw_fatlib
Nothing to be done for tda2px ipu1_1 stw_fatlib_edma
Nothing to be done for tda2px ipu1_1 stw_boards
Nothing to be done for tda2px ipu1_1 stw_devices
Nothing to be done for tda2px ipu1_1 stw_examples_utility
Nothing to be done for tda2px ipu1_1 vps_common
Nothing to be done for tda2px ipu1_1 vpslib
Nothing to be done for tda2px ipu1_1 vpsdrv_baremetal
Nothing to be done for tda2px ipu1_1 fvid2
Nothing to be done for tda2px ipu1_1 vps_osal_tirtos
Nothing to be done for tda2px ipu1_1 vps_osal_tirtos_smp
Nothing to be done for tda2px ipu1_1 vpsdrv
Nothing to be done for tda2px ipu1_1 vps_platforms
Nothing to be done for tda2px ipu1_1 vps_devices
Nothing to be done for tda2px ipu1_1 vps_boards
Nothing to be done for tda2px ipu1_1 vps_examples_utility
Nothing to be done for tda2px ipu1_1 bsp_i2c
Nothing to be done for tda2px ipu1_1 bsp_uart
Nothing to be done for tda2px ipu1_1 bsp_mcspi
Nothing to be done for tda2px ipu2_0 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px ipu2_0 csl
Nothing to be done for tda2px ipu2_0 csl_utils_common
Nothing to be done for tda2px ipu2_0 csl_uart_console
Nothing to be done for tda2px ipu2_0 csl_utils_i2c
Nothing to be done for tda2px ipu2_0 pm_hal
Nothing to be done for tda2px ipu2_0 pm_hal_optimized
Nothing to be done for tda2px ipu2_0 pm_lib
Nothing to be done for tda2px ipu2_0 pm_lib_optimized
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px ipu2_0 sbl_lib
Nothing to be done for tda2px ipu2_0 sbl_utils
Nothing to be done for tda2px ipu2_0 diag
Nothing to be done for tda2px ipu2_0 firewall_l3l4
Nothing to be done for tda2px ipu2_0 norflash_lib
Nothing to be done for tda2px ipu2_0 qspiflash_lib
Nothing to be done for tda2px ipu2_0 i2c_lld
Nothing to be done for tda2px ipu2_0 stw_platform
Nothing to be done for tda2px ipu2_0 stw_uartconsole
Nothing to be done for tda2px ipu2_0 stw_fatlib
Nothing to be done for tda2px ipu2_0 stw_fatlib_edma
Nothing to be done for tda2px ipu2_0 stw_boards
Nothing to be done for tda2px ipu2_0 stw_devices
Nothing to be done for tda2px ipu2_0 stw_examples_utility
Nothing to be done for tda2px ipu2_0 vps_common
Nothing to be done for tda2px ipu2_0 vpslib
Nothing to be done for tda2px ipu2_0 vpsdrv_baremetal
Nothing to be done for tda2px ipu2_0 fvid2
Nothing to be done for tda2px ipu2_0 vps_osal_tirtos
Nothing to be done for tda2px ipu2_0 vps_osal_tirtos_smp
Nothing to be done for tda2px ipu2_0 vpsdrv
Nothing to be done for tda2px ipu2_0 vps_platforms
Nothing to be done for tda2px ipu2_0 vps_devices
Nothing to be done for tda2px ipu2_0 vps_boards
Nothing to be done for tda2px ipu2_0 vps_examples_utility
Nothing to be done for tda2px ipu2_0 bsp_i2c
Nothing to be done for tda2px ipu2_0 bsp_uart
Nothing to be done for tda2px ipu2_0 bsp_mcspi
Nothing to be done for tda2px c66x csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px c66x sbl_lib
Nothing to be done for tda2px c66x sbl_utils
Nothing to be done for tda2px c66x diag
Nothing to be done for tda2px c66x ipc_lib
Nothing to be done for tda2px c66x norflash_lib
Nothing to be done for tda2px c66x qspiflash_lib
Nothing to be done for tda2px c66x stw_fatlib
Nothing to be done for tda2px c66x stw_fatlib_edma
Nothing to be done for tda2px c66x vps_osal_baremetal
Nothing to be done for tda2px c66x vps_common
Nothing to be done for tda2px c66x vpslib
Nothing to be done for tda2px c66x vpsdrv_baremetal
Nothing to be done for tda2px c66x fvid2
Nothing to be done for tda2px c66x vps_osal_tirtos_smp
Nothing to be done for tda2px c66x vpsdrv
Nothing to be done for tda2px c66x vps_platforms
Nothing to be done for tda2px c66x vps_devices
Nothing to be done for tda2px c66x vps_boards
Nothing to be done for tda2px c66x vps_examples_utility
Nothing to be done for tda2px c66x bsp_i2c
Nothing to be done for tda2px c66x bsp_uart
Nothing to be done for tda2px c66x bsp_mcspi
Nothing to be done for tda2px c66xdsp_1 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px c66xdsp_1 csl
Nothing to be done for tda2px c66xdsp_1 csl_utils_common
Nothing to be done for tda2px c66xdsp_1 csl_uart_console
Nothing to be done for tda2px c66xdsp_1 csl_utils_i2c
Nothing to be done for tda2px c66xdsp_1 pm_hal
Nothing to be done for tda2px c66xdsp_1 pm_hal_optimized
Nothing to be done for tda2px c66xdsp_1 pm_lib
Nothing to be done for tda2px c66xdsp_1 pm_lib_optimized
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px c66xdsp_1 sbl_lib
Nothing to be done for tda2px c66xdsp_1 sbl_utils
Nothing to be done for tda2px c66xdsp_1 diag
Nothing to be done for tda2px c66xdsp_1 firewall_l3l4
Nothing to be done for tda2px c66xdsp_1 norflash_lib
Nothing to be done for tda2px c66xdsp_1 qspiflash_lib
Nothing to be done for tda2px c66xdsp_1 i2c_lld
Nothing to be done for tda2px c66xdsp_1 stw_platform
Nothing to be done for tda2px c66xdsp_1 stw_uartconsole
Nothing to be done for tda2px c66xdsp_1 stw_fatlib
Nothing to be done for tda2px c66xdsp_1 stw_fatlib_edma
Nothing to be done for tda2px c66xdsp_1 stw_boards
Nothing to be done for tda2px c66xdsp_1 stw_devices
Nothing to be done for tda2px c66xdsp_1 stw_examples_utility
Nothing to be done for tda2px c66xdsp_1 vps_common
Nothing to be done for tda2px c66xdsp_1 vpslib
Nothing to be done for tda2px c66xdsp_1 vpsdrv_baremetal
Nothing to be done for tda2px c66xdsp_1 fvid2
Nothing to be done for tda2px c66xdsp_1 vps_osal_tirtos
Nothing to be done for tda2px c66xdsp_1 vps_osal_tirtos_smp
Nothing to be done for tda2px c66xdsp_1 vpsdrv
Nothing to be done for tda2px c66xdsp_1 vps_platforms
Nothing to be done for tda2px c66xdsp_1 vps_devices
Nothing to be done for tda2px c66xdsp_1 vps_boards
Nothing to be done for tda2px c66xdsp_1 vps_examples_utility
Nothing to be done for tda2px c66xdsp_1 bsp_i2c
Nothing to be done for tda2px c66xdsp_1 bsp_uart
Nothing to be done for tda2px c66xdsp_1 bsp_mcspi
Nothing to be done for tda2px c66xdsp_2 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px c66xdsp_2 csl
Nothing to be done for tda2px c66xdsp_2 csl_utils_common
Nothing to be done for tda2px c66xdsp_2 csl_uart_console
Nothing to be done for tda2px c66xdsp_2 csl_utils_i2c
Nothing to be done for tda2px c66xdsp_2 pm_hal
Nothing to be done for tda2px c66xdsp_2 pm_hal_optimized
Nothing to be done for tda2px c66xdsp_2 pm_lib
Nothing to be done for tda2px c66xdsp_2 pm_lib_optimized
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px c66xdsp_2 sbl_lib
Nothing to be done for tda2px c66xdsp_2 sbl_utils
Nothing to be done for tda2px c66xdsp_2 diag
Nothing to be done for tda2px c66xdsp_2 firewall_l3l4
Nothing to be done for tda2px c66xdsp_2 norflash_lib
Nothing to be done for tda2px c66xdsp_2 qspiflash_lib
Nothing to be done for tda2px c66xdsp_2 i2c_lld
Nothing to be done for tda2px c66xdsp_2 stw_platform
Nothing to be done for tda2px c66xdsp_2 stw_uartconsole
Nothing to be done for tda2px c66xdsp_2 stw_fatlib
Nothing to be done for tda2px c66xdsp_2 stw_fatlib_edma
Nothing to be done for tda2px c66xdsp_2 stw_boards
Nothing to be done for tda2px c66xdsp_2 stw_devices
Nothing to be done for tda2px c66xdsp_2 stw_examples_utility
Nothing to be done for tda2px c66xdsp_2 vps_common
Nothing to be done for tda2px c66xdsp_2 vpslib
Nothing to be done for tda2px c66xdsp_2 vpsdrv_baremetal
Nothing to be done for tda2px c66xdsp_2 fvid2
Nothing to be done for tda2px c66xdsp_2 vps_osal_tirtos
Nothing to be done for tda2px c66xdsp_2 vps_osal_tirtos_smp
Nothing to be done for tda2px c66xdsp_2 vpsdrv
Nothing to be done for tda2px c66xdsp_2 vps_platforms
Nothing to be done for tda2px c66xdsp_2 vps_devices
Nothing to be done for tda2px c66xdsp_2 vps_boards
Nothing to be done for tda2px c66xdsp_2 vps_examples_utility
Nothing to be done for tda2px c66xdsp_2 bsp_i2c
Nothing to be done for tda2px c66xdsp_2 bsp_uart
Nothing to be done for tda2px c66xdsp_2 bsp_mcspi
Nothing to be done for tda2px arp32_1 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px arp32_1 sbl_lib
Nothing to be done for tda2px arp32_1 sbl_utils
Nothing to be done for tda2px arp32_1 diag
Nothing to be done for tda2px arp32_1 norflash_lib
Nothing to be done for tda2px arp32_1 qspiflash_lib
Nothing to be done for tda2px arp32_1 i2c_lld
Nothing to be done for tda2px arp32_1 stw_fatlib
Nothing to be done for tda2px arp32_1 stw_fatlib_edma
Nothing to be done for tda2px arp32_1 stw_boards
Nothing to be done for tda2px arp32_1 stw_devices
Nothing to be done for tda2px arp32_1 vps_osal_baremetal
Nothing to be done for tda2px arp32_1 vps_common
Nothing to be done for tda2px arp32_1 vpslib
Nothing to be done for tda2px arp32_1 vpsdrv_baremetal
Nothing to be done for tda2px arp32_1 fvid2
Nothing to be done for tda2px arp32_1 vps_osal_tirtos_smp
Nothing to be done for tda2px arp32_1 vpsdrv
Nothing to be done for tda2px arp32_1 vps_platforms
Nothing to be done for tda2px arp32_1 vps_devices
Nothing to be done for tda2px arp32_1 vps_boards
Nothing to be done for tda2px arp32_1 vps_examples_utility
Nothing to be done for tda2px arp32_1 bsp_i2c
Nothing to be done for tda2px arp32_1 bsp_uart
Nothing to be done for tda2px arp32_1 bsp_mcspi
Nothing to be done for tda2px arp32_2 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px arp32_2 csl
Nothing to be done for tda2px arp32_2 csl_utils_common
Nothing to be done for tda2px arp32_2 csl_uart_console
Nothing to be done for tda2px arp32_2 csl_utils_i2c
Nothing to be done for tda2px arp32_2 pm_hal
Nothing to be done for tda2px arp32_2 pm_hal_optimized
Nothing to be done for tda2px arp32_2 pm_lib
Nothing to be done for tda2px arp32_2 pm_lib_optimized
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px arp32_2 sbl_lib
Nothing to be done for tda2px arp32_2 sbl_utils
Nothing to be done for tda2px arp32_2 diag
Nothing to be done for tda2px arp32_2 firewall_l3l4
Nothing to be done for tda2px arp32_2 norflash_lib
Nothing to be done for tda2px arp32_2 qspiflash_lib
Nothing to be done for tda2px arp32_2 i2c_lld
Nothing to be done for tda2px arp32_2 stw_platform
Nothing to be done for tda2px arp32_2 stw_uartconsole
Nothing to be done for tda2px arp32_2 stw_fatlib
Nothing to be done for tda2px arp32_2 stw_fatlib_edma
Nothing to be done for tda2px arp32_2 stw_boards
Nothing to be done for tda2px arp32_2 stw_devices
Nothing to be done for tda2px arp32_2 stw_examples_utility
Nothing to be done for tda2px arp32_2 vps_osal_baremetal
Nothing to be done for tda2px arp32_2 vps_common
Nothing to be done for tda2px arp32_2 vpslib
Nothing to be done for tda2px arp32_2 vpsdrv_baremetal
Nothing to be done for tda2px arp32_2 fvid2
Nothing to be done for tda2px arp32_2 vps_osal_tirtos
Nothing to be done for tda2px arp32_2 vps_osal_tirtos_smp
Nothing to be done for tda2px arp32_2 vpsdrv
Nothing to be done for tda2px arp32_2 vps_platforms
Nothing to be done for tda2px arp32_2 vps_devices
Nothing to be done for tda2px arp32_2 vps_boards
Nothing to be done for tda2px arp32_2 vps_examples_utility
Nothing to be done for tda2px arp32_2 bsp_i2c
Nothing to be done for tda2px arp32_2 bsp_uart
Nothing to be done for tda2px arp32_2 bsp_mcspi
Nothing to be done for tda2px arp32_3 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px arp32_3 csl
Nothing to be done for tda2px arp32_3 csl_utils_common
Nothing to be done for tda2px arp32_3 csl_uart_console
Nothing to be done for tda2px arp32_3 csl_utils_i2c
Nothing to be done for tda2px arp32_3 pm_hal
Nothing to be done for tda2px arp32_3 pm_hal_optimized
Nothing to be done for tda2px arp32_3 pm_lib
Nothing to be done for tda2px arp32_3 pm_lib_optimized
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px arp32_3 sbl_lib
Nothing to be done for tda2px arp32_3 sbl_utils
Nothing to be done for tda2px arp32_3 diag
Nothing to be done for tda2px arp32_3 firewall_l3l4
Nothing to be done for tda2px arp32_3 ipc_lib
Nothing to be done for tda2px arp32_3 norflash_lib
Nothing to be done for tda2px arp32_3 qspiflash_lib
Nothing to be done for tda2px arp32_3 i2c_lld
Nothing to be done for tda2px arp32_3 stw_platform
Nothing to be done for tda2px arp32_3 stw_uartconsole
Nothing to be done for tda2px arp32_3 stw_fatlib
Nothing to be done for tda2px arp32_3 stw_fatlib_edma
Nothing to be done for tda2px arp32_3 stw_boards
Nothing to be done for tda2px arp32_3 stw_devices
Nothing to be done for tda2px arp32_3 stw_examples_utility
Nothing to be done for tda2px arp32_3 vps_osal_baremetal
Nothing to be done for tda2px arp32_3 vps_common
Nothing to be done for tda2px arp32_3 vpslib
Nothing to be done for tda2px arp32_3 vpsdrv_baremetal
Nothing to be done for tda2px arp32_3 fvid2
Nothing to be done for tda2px arp32_3 vps_osal_tirtos
Nothing to be done for tda2px arp32_3 vps_osal_tirtos_smp
Nothing to be done for tda2px arp32_3 vpsdrv
Nothing to be done for tda2px arp32_3 vps_platforms
Nothing to be done for tda2px arp32_3 vps_devices
Nothing to be done for tda2px arp32_3 vps_boards
Nothing to be done for tda2px arp32_3 vps_examples_utility
Nothing to be done for tda2px arp32_3 bsp_i2c
Nothing to be done for tda2px arp32_3 bsp_uart
Nothing to be done for tda2px arp32_3 bsp_mcspi
Nothing to be done for tda2px arp32_4 csl_init
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px arp32_4 csl
Nothing to be done for tda2px arp32_4 csl_utils_common
Nothing to be done for tda2px arp32_4 csl_uart_console
Nothing to be done for tda2px arp32_4 csl_utils_i2c
Nothing to be done for tda2px arp32_4 pm_hal
Nothing to be done for tda2px arp32_4 pm_hal_optimized
Nothing to be done for tda2px arp32_4 pm_lib
Nothing to be done for tda2px arp32_4 pm_lib_optimized
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px arp32_4 sbl_lib
Nothing to be done for tda2px arp32_4 sbl_utils
Nothing to be done for tda2px arp32_4 diag
Nothing to be done for tda2px arp32_4 firewall_l3l4
Nothing to be done for tda2px arp32_4 ipc_lib
Nothing to be done for tda2px arp32_4 norflash_lib
Nothing to be done for tda2px arp32_4 qspiflash_lib
Nothing to be done for tda2px arp32_4 i2c_lld
Nothing to be done for tda2px arp32_4 stw_platform
Nothing to be done for tda2px arp32_4 stw_uartconsole
Nothing to be done for tda2px arp32_4 stw_fatlib
Nothing to be done for tda2px arp32_4 stw_fatlib_edma
Nothing to be done for tda2px arp32_4 stw_boards
Nothing to be done for tda2px arp32_4 stw_devices
Nothing to be done for tda2px arp32_4 stw_examples_utility
Nothing to be done for tda2px arp32_4 vps_osal_baremetal
Nothing to be done for tda2px arp32_4 vps_common
Nothing to be done for tda2px arp32_4 vpslib
Nothing to be done for tda2px arp32_4 vpsdrv_baremetal
Nothing to be done for tda2px arp32_4 fvid2
Nothing to be done for tda2px arp32_4 vps_osal_tirtos
Nothing to be done for tda2px arp32_4 vps_osal_tirtos_smp
Nothing to be done for tda2px arp32_4 vpsdrv
Nothing to be done for tda2px arp32_4 vps_platforms
Nothing to be done for tda2px arp32_4 vps_devices
Nothing to be done for tda2px arp32_4 vps_boards
Nothing to be done for tda2px arp32_4 vps_examples_utility
Nothing to be done for tda2px arp32_4 bsp_i2c
Nothing to be done for tda2px arp32_4 bsp_uart
Nothing to be done for tda2px arp32_4 bsp_mcspi
Nothing to be done for tda2px csl_intc
Nothing to be done for tda2px pm_rtos
Nothing to be done for tda2px a15_0 diag
Nothing to be done for tda2px a15_0 vps_common
Nothing to be done for tda2px a15_0 vpslib
Nothing to be done for tda2px a15_0 vpsdrv_baremetal
Nothing to be done for tda2px a15_0 fvid2
Nothing to be done for tda2px a15_0 vpsdrv
Nothing to be done for tda2px a15_0 vps_platforms
Nothing to be done for tda2px a15_0 vps_devices
Nothing to be done for tda2px a15_0 vps_boards
Nothing to be done for tda2px a15_0 vps_examples_utility
Nothing to be done for tda2px a15_0 bsp_i2c
Nothing to be done for tda2px a15_0 bsp_uart
Nothing to be done for tda2px a15_0 bsp_mcspi
# Depend tda2px-evm:ipu1_0:release:links_common_algorithm
# Depend tda2px-evm:ipu1_1:release:links_common_algorithm
# Depend tda2px-evm:ipu2:release:links_common_algorithm
# Depend tda2px-evm:a15_0:release:links_common_algorithm
# Depend tda2px-evm:c66xdsp_1:release:links_common_algorithm
# Depend tda2px-evm:c66xdsp_2:release:links_common_algorithm
# Depend tda2px-evm:arp32_1:release:links_common_algorithm
# Depend tda2px-evm:arp32_2:release:links_common_algorithm
# Depend tda2px-evm:ipu1_0:release:links_common_dup
# Depend tda2px-evm:ipu1_1:release:links_common_dup
# Depend tda2px-evm:ipu2:release:links_common_dup
# Depend tda2px-evm:a15_0:release:links_common_dup
# Depend tda2px-evm:c66xdsp_1:release:links_common_dup
# Depend tda2px-evm:c66xdsp_2:release:links_common_dup
# Depend tda2px-evm:arp32_1:release:links_common_dup
# Depend tda2px-evm:arp32_2:release:links_common_dup
# Depend tda2px-evm:ipu1_0:release:links_common_gate
# Depend tda2px-evm:ipu1_1:release:links_common_gate
# Depend tda2px-evm:ipu2:release:links_common_gate
# Depend tda2px-evm:a15_0:release:links_common_gate
# Depend tda2px-evm:c66xdsp_1:release:links_common_gate
# Depend tda2px-evm:c66xdsp_2:release:links_common_gate
# Depend tda2px-evm:arp32_1:release:links_common_gate
# Depend tda2px-evm:arp32_2:release:links_common_gate
# Depend tda2px-evm:ipu1_0:release:links_common_ipcIn
# Depend tda2px-evm:ipu1_1:release:links_common_ipcIn
# Depend tda2px-evm:ipu2:release:links_common_ipcIn
# Depend tda2px-evm:a15_0:release:links_common_ipcIn
# Depend tda2px-evm:c66xdsp_1:release:links_common_ipcIn
# Depend tda2px-evm:c66xdsp_2:release:links_common_ipcIn
# Depend tda2px-evm:arp32_1:release:links_common_ipcIn
# Depend tda2px-evm:arp32_2:release:links_common_ipcIn
# Depend tda2px-evm:ipu1_0:release:links_common_ipcOut
# Depend tda2px-evm:ipu1_1:release:links_common_ipcOut
# Depend tda2px-evm:ipu2:release:links_common_ipcOut
# Depend tda2px-evm:a15_0:release:links_common_ipcOut
# Depend tda2px-evm:c66xdsp_1:release:links_common_ipcOut
# Depend tda2px-evm:c66xdsp_2:release:links_common_ipcOut
# Depend tda2px-evm:arp32_1:release:links_common_ipcOut
# Depend tda2px-evm:arp32_2:release:links_common_ipcOut
# Depend tda2px-evm:ipu1_0:release:links_common_merge
# Depend tda2px-evm:ipu1_1:release:links_common_merge
# Depend tda2px-evm:ipu2:release:links_common_merge
# Depend tda2px-evm:a15_0:release:links_common_merge
# Depend tda2px-evm:c66xdsp_1:release:links_common_merge
# Depend tda2px-evm:c66xdsp_2:release:links_common_merge
# Depend tda2px-evm:arp32_1:release:links_common_merge
# Depend tda2px-evm:arp32_2:release:links_common_merge
# Depend tda2px-evm:ipu1_0:release:links_common_null
# Depend tda2px-evm:ipu1_1:release:links_common_null
# Depend tda2px-evm:ipu2:release:links_common_null
# Depend tda2px-evm:a15_0:release:links_common_null
# Depend tda2px-evm:c66xdsp_1:release:links_common_null
# Depend tda2px-evm:c66xdsp_2:release:links_common_null
# Depend tda2px-evm:arp32_1:release:links_common_null
# Depend tda2px-evm:arp32_2:release:links_common_null
# Depend tda2px-evm:ipu1_0:release:links_common_nullSrc
# Depend tda2px-evm:ipu1_1:release:links_common_nullSrc
# Depend tda2px-evm:ipu2:release:links_common_nullSrc
# Depend tda2px-evm:a15_0:release:links_common_nullSrc
# Depend tda2px-evm:ipu1_0:release:links_common_select
# Depend tda2px-evm:ipu1_1:release:links_common_select
# Depend tda2px-evm:ipu2:release:links_common_select
# Depend tda2px-evm:a15_0:release:links_common_select
# Depend tda2px-evm:c66xdsp_1:release:links_common_select
# Depend tda2px-evm:c66xdsp_2:release:links_common_select
# Depend tda2px-evm:arp32_1:release:links_common_select
# Depend tda2px-evm:arp32_2:release:links_common_select
# Depend tda2px-evm:ipu1_0:release:links_common_sync
# Depend tda2px-evm:ipu1_1:release:links_common_sync
# Depend tda2px-evm:ipu2:release:links_common_sync
# Depend tda2px-evm:a15_0:release:links_common_sync
# Depend tda2px-evm:c66xdsp_1:release:links_common_sync
# Depend tda2px-evm:c66xdsp_2:release:links_common_sync
# Depend tda2px-evm:arp32_1:release:links_common_sync
# Depend tda2px-evm:arp32_2:release:links_common_sync
# Depend tda2px-evm:ipu1_0:release:links_ipu_display
# Depend tda2px-evm:ipu1_0:release:links_ipu_display_ctrl
# Depend tda2px-evm:ipu1_0:release:links_ipu_iss_capture
# Depend tda2px-evm:ipu1_0:release:links_ipu_iss_m2misp
# Depend tda2px-evm:ipu1_0:release:links_ipu_iss_m2msimcop
# Depend tda2px-evm:ipu1_0:release:links_ipu_iss_m2mresizer
# Depend tda2px-evm:ipu1_0:release:links_ipu_vip_capture
# Depend tda2px-evm:ipu1_0:release:links_ipu_vpe
# Depend tda2px-evm:ipu1_0:release:links_ipu_dssM2mWb
# Depend tda2px-evm:ipu1_0:release:utils_common
# Depend tda2px-evm:ipu1_1:release:utils_common
# Depend tda2px-evm:ipu2:release:utils_common
# Depend tda2px-evm:a15_0:release:utils_common
# Depend tda2px-evm:c66xdsp_1:release:utils_common
# Depend tda2px-evm:c66xdsp_2:release:utils_common
# Depend tda2px-evm:arp32_1:release:utils_common
# Depend tda2px-evm:arp32_2:release:utils_common
# Depend tda2px-evm:ipu1_0:release:links_common_system
# Depend tda2px-evm:ipu1_1:release:links_common_system
# Depend tda2px-evm:ipu2:release:links_common_system
# Depend tda2px-evm:a15_0:release:links_common_system
# Depend tda2px-evm:c66xdsp_1:release:links_common_system
# Depend tda2px-evm:c66xdsp_2:release:links_common_system
# Depend tda2px-evm:arp32_1:release:links_common_system
# Depend tda2px-evm:arp32_2:release:links_common_system
# Depend tda2px-evm:c66xdsp_1:release:links_dsp_system
# Depend tda2px-evm:c66xdsp_2:release:links_dsp_system
# Depend tda2px-evm:arp32_1:release:links_eve_system
# Depend tda2px-evm:arp32_2:release:links_eve_system
# Depend tda2px-evm:ipu1_0:release:links_ipu_system
# Depend tda2px-evm:ipu1_1:release:links_ipu_system
# Depend tda2px-evm:ipu2:release:links_ipu_system
# Depend tda2px-evm:a15_0:release:links_a15_system
root@bhagyashree-Latitude-5490:/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build# make -s
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
# Compiling tda2px-evm:ipu1_0:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:ipu1_0:release:links_common_algorithm
#
# Compiling tda2px-evm:ipu1_1:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:ipu1_1:release:links_common_algorithm
#
# Compiling tda2px-evm:ipu2:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:ipu2:release:links_common_algorithm
#
# Compiling tda2px-evm:a15_0:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:a15_0:release:links_common_algorithm
#
# Compiling tda2px-evm:c66xdsp_1:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:c66xdsp_1:release:links_common_algorithm
#
# Compiling tda2px-evm:c66xdsp_2:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:c66xdsp_2:release:links_common_algorithm
#
# Compiling tda2px-evm:arp32_1:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:arp32_1:release:links_common_algorithm
#
# Compiling tda2px-evm:arp32_2:release:links_common_algorithm: algorithmLink_cfg.c
#
# Archiving tda2px-evm:arp32_2:release:links_common_algorithm
#
# Compiling tda2px-evm:ipu1_0:release:links_common_system: system_common.c
# Compiling tda2px-evm:ipu1_0:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:ipu1_0:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:ipu1_0:release:links_common_system
#
# Compiling tda2px-evm:ipu1_1:release:links_common_system: system_common.c
# Compiling tda2px-evm:ipu1_1:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:ipu1_1:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:ipu1_1:release:links_common_system
#
# Compiling tda2px-evm:ipu2:release:links_common_system: system_common.c
# Compiling tda2px-evm:ipu2:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:ipu2:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:ipu2:release:links_common_system
#
# Compiling tda2px-evm:a15_0:release:links_common_system: system_common.c
# Compiling tda2px-evm:a15_0:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:a15_0:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:a15_0:release:links_common_system
#
# Compiling tda2px-evm:c66xdsp_1:release:links_common_system: system_common.c
# Compiling tda2px-evm:c66xdsp_1:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:c66xdsp_1:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:c66xdsp_1:release:links_common_system
#
# Compiling tda2px-evm:c66xdsp_2:release:links_common_system: system_common.c
# Compiling tda2px-evm:c66xdsp_2:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:c66xdsp_2:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:c66xdsp_2:release:links_common_system
#
# Compiling tda2px-evm:arp32_1:release:links_common_system: system_common.c
# Compiling tda2px-evm:arp32_1:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:arp32_1:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:arp32_1:release:links_common_system
#
# Compiling tda2px-evm:arp32_2:release:links_common_system: system_common.c
# Compiling tda2px-evm:arp32_2:release:links_common_system: system_initDeinitLinks.c
# Compiling tda2px-evm:arp32_2:release:links_common_system: system_ipc_bios_ipc.c
#
# Archiving tda2px-evm:arp32_2:release:links_common_system
#
# Compiling tda2px-evm:ipu1_0:release:links_ipu_system: system_ipu1_0.c
#
# Archiving tda2px-evm:ipu1_0:release:links_ipu_system
#
# Compiling tda2px-evm:ipu1_1:release:links_ipu_system: system_ipu1_1.c
#
# Archiving tda2px-evm:ipu1_1:release:links_ipu_system
#
# Compiling tda2px-evm:ipu2:release:links_ipu_system: system_ipu2.c
#
# Archiving tda2px-evm:ipu2:release:links_ipu_system
#
# Compiling tda2px-evm:a15_0:release:links_a15_system: system_a15.c
#
# Archiving tda2px-evm:a15_0:release:links_a15_system
#
# Compiling tda2px-evm:ipu1_0:release:app_alg_plugins: /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/src/rtos/draw2d/draw2d_font_bmp.c
# Compiling tda2px-evm:ipu1_0:release:app_alg_plugins: /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/src/rtos/modules/network_ctrl/network_ctrl_handle_mmc_wr_proxy.c
"/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/links_fw/src/rtos/utils_common/include/network_api.h", line 87: fatal error: cannot open source file "ti/ndk/inc/netmain.h"
1 catastrophic error detected in the compilation of "/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/src/rtos/modules/network_ctrl/network_ctrl_handle_mmc_wr_proxy.c".
Compilation terminated.

>> Compilation failure
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build/rtos/makerules/rules_m4.mk:177: recipe for target '/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/binaries/apps/tda2px_evm_bios_all/obj/app_alg_plugins/tda2px-evm/m4/release/network_ctrl_handle_mmc_wr_proxy.oem4' failed
make[5]: *** [/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/binaries/apps/tda2px_evm_bios_all/obj/app_alg_plugins/tda2px-evm/m4/release/network_ctrl_handle_mmc_wr_proxy.oem4] Error 1
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build/rtos/makerules/common.mk:235: recipe for target 'ipu1_0' failed
make[4]: *** [ipu1_0] Error 2
MAKEFILE.MK:9: recipe for target 'libs' failed
make[3]: *** [libs] Error 2
Makefile:200: recipe for target 'app_alg_plugins' failed
make[2]: *** [app_alg_plugins] Error 2
Makefile:36: recipe for target 'apps' failed
make[1]: *** [apps] Error 2
Makefile:12: recipe for target 'vision_sdk' failed
root@bhagyashree-Latitude-5490:/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build# make showconfig
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
make -C /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs -f build_makeconfig.mk showconfig
make[1]: Entering directory '/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs'
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
#
# Build Config is [ tda2px_evm_bios_all ]
# Build Config file is @ /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/configs/tda2px_evm_bios_all/cfg.mk
# Build Config .h file is @ /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/links_fw/include/config/apps/tda2px_evm_bios_all/system_cfg.h
# Build CPUs is @ ipu1_0 ipu1_1 ipu2 a15_0 dsp1 dsp2 eve1 eve2
#
# CPUs included in application,
# PROC_IPU1_0_INCLUDE=yes
# PROC_IPU1_1_INCLUDE=yes
# PROC_IPU2_INCLUDE=yes
# PROC_DSP1_INCLUDE=yes
# PROC_DSP2_INCLUDE=yes
# PROC_EVE1_INCLUDE=yes
# PROC_EVE2_INCLUDE=yes
# PROC_EVE3_INCLUDE=no
# PROC_EVE4_INCLUDE=no
# PROC_A15_0_INCLUDE=yes
#
# Platform config,
# VSDK_BOARD_TYPE=TDA2PX_EVM [options: TDA2XX_EVM TDA2EX_EVM TDA3XX_EVM TDA3XX_RVP TDA2XX_RVP]
# PLATFORM=tda2px-evm
# DUAL_A15_SMP_BIOS=no
# IPU1_SMP_BIOS=no
# DDR_MEM=DDR_MEM_512M [options: DDR_MEM_128M DDR_MEM_512M DDR_MEM_1024M]
# EMIFMODE=SINGLE_EMIF_512MB [options: SINGLE_EMIF_512MB SINGLE_EMIF_1GB ref build_pdk.mk]
# NDK_PROC_TO_USE=none [options: a15_0 ipu1_0 ipu1_1 ipu2 none]
# NSP_TFDTP_INCLUDE=no [options: yes no]
# TDA2EX_ETHSRV_BOARD=no [options: yes no]
# FATFS_PROC_TO_USE=ipu1_0 [options: ipu1_0 none]
# RADAR_BOARD=none [options: TDA3XX_AR12_ALPS TDA3XX_AR12_VIB_DAB_BOOSTER TDA3XX_RADAR_RVP none]
#
# Build config,
# BUILD_OS=Linux [options: Windows_NT Linux]
# BUILD_DEPENDENCY_ALWAYS=no
# BUILD_ALGORITHMS=no
# BUILD_INFOADAS=no
# PROFILE=release [options: debug release]
# KW_BUILD=no
# CPLUSPLUS_BUILD=no
# IPU_PRIMARY_CORE=ipu1_0 [options: ipu1_0 ipu2]
# IPU_SECONDARY_CORE=ipu2 [options: ipu1_0 ipu2]
# A15_TARGET_OS=Bios [options: Bios Linux Qnx]
# BSP_STW_PACKAGE_SELECT=all [options: all vps-iss-dss-only vps-vip-vpe]
#
# Safety Module config,
# RTI_INCLUDE=no
# ECC_FFI_INCLUDE=no
# DCC_ESM_INCLUDE=no
#
# Video Module config,
# IVAHD_INCLUDE=no
# VPE_INCLUDE=yes
# CAL_INCLUDE=yes
# ISS_INCLUDE=yes
# ISS_ENABLE_DEBUG_TAPS=no
# WDR_LDC_INCLUDE=no
# DSS_INCLUDE=yes
#
# Open Compute config,
# OPENCL_INCLUDE=no
# TARGET_ROOTDIR=/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/src/rtos/opencl
# ENABLE_OPENCV=no
# ENABLE_OPENCV_TESTS=no
# OPENVX_INCLUDE=no
#
# Log config,
# ENABLE_UART_LOG=yes
# ENABLE_NETWORK_LOG=no
# ENABLE_CCS_LOG=no
# CIO_REDIRECT=yes
#
# IPC config,
# WORKQ_INCLUDE=yes
# IPC_LIB_INCLUDE=no
#
# AUTOSAR_APP=no
#
# Surround View config,
# SRV_FAST_BOOT_INCLUDE=no
#
# Other Module config,
# AVB_INCLUDE=no
# DCAN_INCLUDE=no
# RADAR_ONLY=no
# CPU_IDLE_ENABLED=yes
# FAST_BOOT_INCLUDE=no
# DATA_VIS_INCLUDE=no
# HS_DEVICE=no
# ULTRASONIC_INCLUDE=no
# PGA450=
# PGA460=
# ENABLE_ALL_DEPTH=
#
# Linux config,
# DEFAULT_UBOOT_CONFIG=dra7xx_evm_vision_config
# DEFAULT_KERNEL_CONFIG=ti_sdk_dra7x_release_defconfig
# DEFAULT_DTB=dra7-evm-infoadas.dtb
# CMEM_INCLUDE=no
# IPUMM_INCLUDE=no
# IPU1_EVELOADER_INCLUDE=no
# ROBUST_RVC_INCLUDE=no
# BUILD_ADAM_CAR=no
#
# Alg plugins included in build,
# ALG_autocalibration ALG_clr ALG_deWarp ALG_dmaSwMs ALG_vpeSwMs ALG_edgedetection ALG_framecopy ALG_lanedetection ALG_objectdetection ALG_safe_framecopy ALG_sceneobstruction ALG_sfm ALG_sparseopticalflow ALG_subframecopy ALG_surroundview ALG_tidl ALG_radarprocess ALG_iss_aewb
#
# Use-cases included in build,
# UC_iss_capture_isp_simcop_display UC_iss_mult_capture_isp_2d_3d_sv_tda3x UC_iss_mult_capture_isp_dewarp_3dsv_tda3xx UC_iss_mult_capture_isp_simcop_sv_tda3xx UC_iss_multi_inst_capture_display UC_srv_calibration UC_lvds_vip_multi_cam_view UC_lvds_vip_sv_standalone UC_network_rx_tx UC_null_src_dec_display UC_null_src_display UC_saveDisFrame UC_vip_single_cam_analytics2 UC_vip_single_cam_edge_detection UC_vip_single_cam_frame_copy UC_vip_single_cam_frame_copy_safety UC_vip_single_cam_lane_detection UC_vip_single_cam_object_detection2 UC_vip_single_cam_sfm UC_vip_single_cam_sparse_optical_flow UC_vip_single_cam_subframe_copy UC_vip_single_cam_tlr UC_vip_single_cam_view UC_vip_single_cam_view_encdec UC_camera_radar_capture_display UC_tidl_OD_radar_process_display UC_radar_objectdetect_display
#
make -s -fbuild_makeconfig.mk check_cpu_include
make[2]: Entering directory '/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs'
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: ndk_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: nsp_PATH does not exist! ()
/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs/autorules_footer_cfg.mk:67: avbtp_PATH does not exist! ()
#
# CPUs that are NOT required but included in config [ tda2px_evm_bios_all ],
#
# WARNING: IPU1_1 can be excluded from application
# WARNING: IPU2 can be excluded from application
#
# CPUs that are required but not included in config [ tda2px_evm_bios_all ],
#
#
# Edit /home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build/configs/tda2px_evm_bios_all/cfg.mk to include or exclude CPUs in an application
#
make[2]: Leaving directory '/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs'
make[1]: Leaving directory '/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/apps/configs'
root@bhagyashree-Latitude-5490:/home/bhagyashree/Desktop/PROCESSOR_SDK_VISION_03_05_00_00_setup/vision_sdk/build#

Thanks & Regards,

Bhagyashree

↧

THS4541: TINA TI simulations

November 25, 2019, 9:33 pm
$
0
0

Part Number: THS4541

Hi team,

I will simulate THS4541 by TINA TI.

But I did't use TINA TI, I am not sure how to use it.

I want to be able to perform AC analysis, transient analysis, and noise analysis on a general circuit.

For example, a general circuit such as the circuit on the first page of the data sheet.

I tried to download THS4541 TINA-TI Reference Design from the homepage, but I couldn't download it.

By the way, I can download THS4541 TINA-TI spice model.

I'm happy with the reference design that can be used as it is, but can you give me a simulation circuit that can be used as a reference?

Best regards,

Tomoaki Yoshida

↧
↧

TMS320F28375D: Period jitters on their HRPWM outputs.

November 25, 2019, 9:40 pm
$
0
0

Part Number: TMS320F28375D

Hello,

My customer’s F28375D has *period* jitters on their HRPWM outputs.

Could you please advise how to clear the jitter ?

 

Jittter description:

My customer found several falling edges.

- The total # of high time variation is not clear. We are sorry.

- The input clock for EPWM is 10nsec.

 

 

The TRM SPRUHM8i has a description in “15.14.1.5.4 High Resolution Period”.

On the p.1967, There is a note:

>>>>> 

NOTE: When high-resolution period mode is enabled, an EPWMxSYNC pulse will introduce +/- 1 - 2

cycle jitter to the PWM (+/- 1 cycle in up-count mode and +/- 2 cycle in up-down count

mode). For this reason, TBCTL[SYNCOSEL] should not be set to 1 (CTR = 0 is

EPWMxSYNCO source) or 2 (CTR = CMPB is EPWMxSYNCO source). Otherwise, the jitter

will occur on every PWM cycle with the synchronization pulse.

When TBCTL[SYNCOSEL] = 0 (EPWMxSYNCI is EPWMxSYNCO source), a software

synchronization pulse should be issued only once during high-resolution period initialization.

If a software sync pulse is applied while the PWM is running, the jitter will appear on the

PWM output at the time of the sync pulse.

<<<<< 

 

From the note, we understand that the PWM outputs have period jitters under some condition.

 

Then, could you please advise how to remove the jitters in the following usage ?:

  • The F28378D is required to output a couple of EPWM modules to output complemental PWM outputs.
  •    A single module output EPWMxA and EPWMxB signals.
  • Two modules work in synchronous.
  • The period is in high-resolution. The value is more than ten or a hundred. Not too small.
  • The count mode is up-down.
  • The PWMs toggles at the CTR=zero in the module.

 

 

We are aware of the PWM connection. The TRM has a figure on p.1876.

We can use three or more PWM modules if we need to use EPWM1 as oscillator only, and use EPWM2 and -3 to output PWMs.

 

 

 

↧

BQ25887: is I2C required for the BQ25887 chip to use it's auto cell balancing ability?

November 25, 2019, 9:41 pm
$
0
0

Part Number: BQ25887

Hello, I was wondering if the BQ25887RGER requires an I2C input in order to enable its auto cell balancing ability.  I was also wondering (in the case that I2C isn't required for the chip to have auto cell balancing enabled), if the chip can thus operate without any I2C input to it.

-Jeremy Sklute

↧

TAS2505-Q1: About noise shaping

November 25, 2019, 9:42 pm
$
0
0

Part Number: TAS2505-Q1

Hi TI-team
When using the digital path (DAC), I think you are doing noise shaping with ΔΣ.
Do you have the noise shaping waveform at that time ?
Would you please paste it if you have it ?
 
Best Regards,
Koji Hayashi
↧
Search

TDC7201: Duo SPI connection at TDC7201

November 25, 2019, 9:43 pm
$
0
0

Part Number: TDC7201

Hi team,

Customer would like to use our TDC7201 and there is one question about SPI connection. The question is as below. 

    According to TDC7201 spec. saying , it support doubles data read out throughput but requires a second dedicated SPI ....

    Their question is these two DOUT are shared same SCLK and DIN, how to treat the 2nd SPI's SCLK ?  how the 2nd SPI to trigger DOUT data by 1st SPI SCLK ?

↧
↧

AM5728: PWM on DMTimer

November 25, 2019, 9:56 pm
$
0
0

Part Number: AM5728

Hi,

Processor SDK Linux: 05.02.00.10

kernel: 4.14.79

dts ：

/ {...
    pwm4: dmtimer-pwm@4 {
        compatible = "ti,omap-dmtimer-pwm";
        status = "okay";
        ti,timers = <&timer4>;
        #pwm-cells = <3>;
        pinctrl-names = "default";
        pinctrl-0 = <&dmtimer4_pins>;
    };
};
&timer4{
    status = "okay";
    ti,timer-pwm;
};
&dra7_pmx_core {
    dmtimer4_pins: dmtimer4_pins {
        pinctrl-single,pins = <
            DRA7XX_CORE_IOPAD(0x36D0, PIN_OUTPUT_PULLDOWN | MUX_MODE10) /* timer4 */
        >;
    };
};
driver：drivers\pwm\pwm-omap-dmtimer.c

description:

1)
insmod pwm-omap-dmtimer.ko
rm pwm-omap-dmtimer
insmod pwm-omap-dmtimer.ko

2）
echo 0 > /sys/class/pwm/pwmchip0/export
echo 1000000 > /sys/class/pwm/pwmchip0/pwm0/period 

l3_5F00_2.JPG (1185×904)

I tried to follow up the code and found that this warning is caused by the recovery of the irq after unlocking,such as local_irq_restore(), local_irq_enable.

error:

am5728 kernel l3_interrupt_handler WARNING : L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in Supervisor mode during Functional access

Please help check configuration of generating PWM.

↧

CCS/LAUNCHXL-CC1310: Cannot use usleep() to implement SWIF symbols. error in observed timeperiod is significant(if not too much)

November 25, 2019, 9:56 pm
$
0
0

Part Number: LAUNCHXL-CC1310

Tool/software: Code Composer Studio

Hi everyone,

I am trying to implement SWIF protocol using CC1310 and DAC161P997. For starters, I am trying to generate pulses of width 100us(i.e., Time period). For this, I am using empty example in SimpleLink SDK v3.20 wherein I toggle the GPIO (red LED by default) using usleep for every 100us. but when I observe the signal on oscilloscope, the time period comes out to be 183.1us which is 83% error. Following is the code I am using to implement this.

#define TIMEPERIOD 100//in microseconds

void *mainThread(void *arg0)
{
    /* Call driver init functions */
    GPIO_init();

    /* Configure the LED pin */
    GPIO_setConfig(Board_GPIO_LED0, GPIO_CFG_OUT_STD | GPIO_CFG_OUT_LOW);

    /* Turn on user LED */
    GPIO_write(Board_GPIO_LED0, Board_GPIO_LED_ON);

    while (1) {
        usleep(TIMEPERIOD);
        GPIO_toggle(Board_GPIO_LED0);
    }
}

Can someone suggest what can be done?

Thanks in advance,

-Chandrasekhar DVS

↧

CCS/DRA71XEVM: TDA2e 17x17 run ipu1 assertion failure

November 25, 2019, 9:57 pm
$
0
0

Part Number: DRA71XEVM

Tool/software: Code Composer Studio

we want to use both ipu1  and ipu2 

SO :  we modify apps/configs/tda2ex_17x17_evm_linux_all/cfg.mk

diff --git a/apps/configs/tda2ex_17x17_evm_linux_all/cfg.mk b/apps/configs/tda2ex_17x17_evm_linux_all/cfg.mk
index f2a0fa1..33f39e5 100755
--- a/apps/configs/tda2ex_17x17_evm_linux_all/cfg.mk
+++ b/apps/configs/tda2ex_17x17_evm_linux_all/cfg.mk
@@ -17,9 +17,9 @@
 # CPUs to included in build
 #
 # IPU1 (core 0 & 1 are) not supported when IPU_PRIMARY_CORE=ipu2
-PROC_IPU1_0_INCLUDE=no
+PROC_IPU1_0_INCLUDE=yes
 PROC_IPU1_1_INCLUDE=no
-PROC_IPU2_INCLUDE=yes
+PROC_IPU2_INCLUDE=no
 PROC_A15_0_INCLUDE=yes
 PROC_DSP1_INCLUDE=yes
 
@@ -57,8 +57,8 @@ PROFILE_a15_0 ?= $(PROFILE)
 # Select IPU primary core from the available IPU1 & IPU2 subsytems
 #
 # Supported values: ipu1_0 ipu2
-IPU_PRIMARY_CORE=ipu2
-IPU_SECONDARY_CORE=ipu1_0
+IPU_PRIMARY_CORE=ipu1_0
+IPU_SECONDARY_CORE=ipu2

BUT AS WE RUN APPS.OUT:

 

[HOST]  OSA: MEM: 0: Mapped 0xbfc00000 to 0xa7795000 of size 0x00100000
 [HOST]  OSA: MEM: 1: Mapped 0x84203000 to 0x9aa95000 of size 0x0cd00000
 [HOST]  OSA: MEM: 2: Mapped 0xbfd00000 to 0x9a9d5000 of size 0x00040000
 [HOST]  OSA: MEM: 3: Mapped 0xbfdc0000 to 0x9aa15000 of size 0x00080000
 [HOST]  OSA: MEM: 4: Mapped 0x00000000 to 0x00000000 of size 0x00000000
 [HOST]  OSA: IPU1-0 Remote Log Shared Memory @ 0xbfd00000
 [HOST]  OSA: HOST Remote Log Shared Memory @ 0xbfd4f140
 [HOST]  OSA: DSP1 Remote Log Shared Memory @ 0xbfd769e0
 [HOST] [IPU1-0]     17.628072 s:  ***** IPU1_0 Firmware build time 11:17:38 Nov 26 2019
 [HOST] [IPU1-0]     17.628286 s:  *** SYSTEM: CPU Frequency <ORG = 212800000 Hz>, <NEW = 221600000 Hz>
 [HOST] [IPU1-0]     17.631062 s:  SYSTEM: System Common Init in progress !!!
 [HOST] [IPU1-0]     17.639693 s:  SYSTEM: IPC init in progress !!!
 [HOST] [IPU1-0]     17.639785 s:  SYSTEM: Attaching to [DSP1] ...
 [HOST] [IPU1-0]     17.889709 s:  SYSTEM: Attaching to [DSP1] ... SUCCESS !!!
 [HOST] [IPU1-0]     17.889831 s:  SYSTEM: Notify register to [DSP1] line 0, event 15...
 [HOST] [IPU1-0]     17.889953 s:  SYSTEM: Notify init done !!!
 [HOST] [IPU1-0]     17.891630 s:  SYSTEM: MsgQ init done !!!
 [HOST] [IPU1-0]     17.892545 s: RpmsgInit in progress...
 [HOST] [IPU1-0]     17.892637 s: Connection established with HLOS, calling rpmsgInit
 [HOST] [IPU1-0]     17.893460 s:
 [HOST] [IPU1-0]     17.893521 s:  ### XDC ASSERT - ERROR CALLBACK START ###
 [HOST] [IPU1-0]     17.893582 s:
 [HOST] [IPU1-0]     17.893918 s: assertion failure
 [HOST] [IPU1-0]     17.893979 s:
 [HOST] [IPU1-0]     17.894009 s:  ### XDC ASSERT - ERROR CALLBACK END ###
 [HOST] [IPU1-0]     17.894070 s:
 [HOST] [HOST  ]     73.440645 s:  SYSTEM: System A15 Init in progress !!!
 [HOST] [DSP1  ]     17.887360 s:  ***** DSP1 Firmware build time 11:15:13 Nov 26 2019
 [HOST] [DSP1  ]     17.887421 s:  *** SYSTEM: CPU Frequency <ORG = 600000000 Hz>, <NEW = 781250000 Hz>
 [HOST] [DSP1  ]     17.887573 s:  SYSTEM: System Common Init in progress !!!
 [HOST] [DSP1  ]     17.887665 s:  SYSTEM: IPC init in progress !!!
 [HOST] [DSP1  ]     17.887695 s:  SYSTEM: Attaching to [IPU1-0] ...
 [HOST] [DSP1  ]     17.889709 s:  SYSTEM: Attaching to [IPU1-0] ... SUCCESS !!!
 [HOST] [DSP1  ]     17.889739 s:  SYSTEM: Notify register to [IPU1-0] line 0, event 15...
 [HOST] [DSP1  ]     17.889800 s:  SYSTEM: Notify init done !!!
 [HOST] [DSP1  ]     17.889892 s:  SYSTEM: MsgQ init done !!!
 [HOST] [DSP1  ]     17.889983 s: RpmsgInit in progress...
 [HOST] [DSP1  ]     17.890014 s:  SYSTEM: IPC init DONE !!!
 [HOST] [DSP1  ]     17.890837 s:  SYSTEM: System Common Init Done !!!
 [HOST] [DSP1  ]     17.890868 s:  SYSTEM: System DSP Init in progress !!!
 [HOST] [DSP1  ]     17.891508 s:  SYSTEM: SW Message Box Msg Pool, Free Msg Count = 1024
 [HOST] [DSP1  ]     17.891539 s:  SYSTEM: Heap = LOCAL_L2             @ 0x00800000, Total size = 227264 B (221 KB), Free size = 227264 B (221 KB)
 [HOST] [DSP1  ]     17.891600 s:  SYSTEM: Heap = LOCAL_DDR            @ 0x00000000, Total size = 524288 B (512 KB), Free size = 522072 B (509 KB)
 [HOST] [DSP1  ]     17.891661 s:  SYSTEM: Initializing Links !!!
 [HOST] [DSP1  ]     17.903983 s:  SYSTEM: Initializing Links ... DONE !!!
 [HOST] [DSP1  ]     17.904013 s: lz4CompDecomp Init
 [HOST] [DSP1  ]     17.904044 s:  SYSTEM: System DSP Init Done !!!
 [HOST] [DSP1  ]     17.909565 s: Connection established with HLOS, calling rpmsgInit
 [HOST] [DSP1  ]     17.909778 s:
 [HOST] [DSP1  ]     17.909809 s:  ### XDC ASSERT - ERROR CALLBACK START ###
 [HOST] [DSP1  ]     17.909809 s:
 [HOST] [DSP1  ]     17.909900 s: assertion failure
 [HOST] [DSP1  ]     17.909931 s:
 [HOST] [DSP1  ]     17.909931 s:  ### XDC ASSERT - ERROR CALLBACK END ###
 [HOST] [DSP1  ]     17.909931 s:

dmesg log like this :

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.84+ (fanlvchao@server) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #44 SMP PREEMPT Mon Nov 25 21:58:27 CST 2019
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: TI DRA718 EVM
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB
[    0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000098000000, size 32 MiB
[    0.000000] Reserved memory: initialized node ipu2_cma, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009a000000, size 16 MiB
[    0.000000] Reserved memory: initialized node dsp1_cma, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009b000000, size 32 MiB
[    0.000000] Reserved memory: initialized node ipu1_cma, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009d200000, size 32 MiB
[    0.000000] Reserved memory: initialized node cmem@9d200000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] cma: Reserved 24 MiB at 0x0000000096800000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OMAP4: Map 0x000000009fd00000 to fe600000 for dram barrier
[    0.000000] On node 0 totalpages: 122112
[    0.000000] free_area_init_node: node 0, pgdat c092e500, node_mem_map df63d000
[    0.000000]   DMA zone: 1152 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 122112 pages, LIFO batch:31
[    0.000000] DRA722 ES2.1
[    0.000000] PERCPU: Embedded 11 pages/cpu @df5d2000 s14912 r8192 d21952 u45056
[    0.000000] pcpu-alloc: s14912 r8192 d21952 u45056 alloc=11*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 120960
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait mem=512M
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 151780K/488448K available (6443K kernel code, 307K rwdata, 2292K rodata, 336K init, 288K bss, 230172K reserved, 106496K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc088fffc   (8736 kB)
[    0.000000]       .init : 0xc0890000 - 0xc08e4000   ( 336 kB)
[    0.000000]       .data : 0xc08e4000 - 0xc0930fe0   ( 308 kB)
[    0.000000]        .bss : 0xc0932000 - 0xc097a040   ( 289 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div
[    0.000000] OMAP clockevent source: timer1 at 31475 Hz
[    0.000000] Architected cp15 timer(s) running at 5.90MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x15c70fb29, max_idle_ns: 440795202138 ns
[    0.000005] sched_clock: 56 bits at 5MHz, resolution 169ns, wraps every 4398046511093ns
[    0.000016] Switching to timer-based delay loop, resolution 169ns
[    0.000329] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000337] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000757] Console: colour dummy device 80x30
[    0.000776] Calibrating delay loop (skipped), value calculated using timer frequency.. 11.80 BogoMIPS (lpj=59016)
[    0.000788] pid_max: default: 32768 minimum: 301
[    0.000887] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000897] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001417] Initializing cgroup subsys io
[    0.001434] Initializing cgroup subsys memory
[    0.001458] Initializing cgroup subsys devices
[    0.001470] Initializing cgroup subsys freezer
[    0.001481] Initializing cgroup subsys perf_event
[    0.001492] Initializing cgroup subsys pids
[    0.001518] CPU: Testing write buffer coherency: ok
[    0.001722] /cpus/cpu@0 missing clock-frequency property
[    0.001733] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001765] Setting up static identity map for 0x80008380 - 0x800083e0
[    0.050028] Brought up 1 CPUs
[    0.050039] SMP: Total of 1 processors activated (11.80 BogoMIPS).
[    0.050046] CPU: All CPU(s) started in HYP mode.
[    0.050052] CPU: Virtualization extensions available.
[    0.050362] devtmpfs: initialized
[    0.080024] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.080995] omap_hwmod: l3_main_2 using broken dt data from ocp
[    0.262461] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.262484] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.272493] pinctrl core: initialized pinctrl subsystem
[    0.273360] NET: Registered protocol family 16
[    0.274282] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.300183] cpuidle: using governor ladder
[    0.330209] cpuidle: using governor menu
[    0.338887] OMAP GPIO hardware version 0.1
[    0.345362] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 !
[    0.366149] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.366160] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.366578] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.366587] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.367184] OMAP DMA hardware revision 0.0
[    0.451136] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[    0.452283] edma 43300000.edma: memcpy is disabled
[    0.457111] edma 43300000.edma: TI EDMA DMA engine driver
[    0.461904] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[    0.462090] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[    0.462256] omap-iommu 58882000.mmu: 58882000.mmu registered
[    0.462419] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.481162] pcf857x: probe of 0-0020 failed with error -121
[    0.481425] pcf857x: probe of 0-0021 failed with error -121
[    0.481813] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    0.482271] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
[    0.501257] pcf857x: probe of 4-0026 failed with error -121
[    0.501646] pca953x 4-0020: failed reading register
[    0.501663] pca953x: probe of 4-0020 failed with error -121
[    0.501819] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 100 kHz
[    0.501981] media: Linux media interface: v0.10
[    0.502034] Linux video capture interface: v2.00
[    0.502075] pps_core: LinuxPPS API ver. 1 registered
[    0.502082] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.502107] PTP clock support registered
[    0.502154] EDAC MC: Ver: 3.0.0
[    0.511694] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[    0.511899] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[    0.512983] clocksource: Switched to clocksource arch_sys_counter
[    0.523042] NET: Registered protocol family 2
[    0.523539] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.523577] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.523644] TCP: Hash tables configured (established 4096 bind 4096)
[    0.523681] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.523702] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.523892] NET: Registered protocol family 1
[    0.534184] RPC: Registered named UNIX socket transport module.
[    0.534194] RPC: Registered udp transport module.
[    0.534200] RPC: Registered tcp transport module.
[    0.534206] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.534226] PCI: CLS 0 bytes, default 64
[    0.535158] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.555140] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.565825] NFS: Registering the id_resolver key type
[    0.565853] Key type id_resolver registered
[    0.565861] Key type id_legacy registered
[    0.565918] ntfs: driver 2.1.32 [Flags: R/O].
[    0.567534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.567551] io scheduler noop registered
[    0.567563] io scheduler deadline registered
[    0.567597] io scheduler cfq registered (default)
[    0.571688] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128
[    0.571816] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4
[    0.574939] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges:
[    0.574953]   No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff]
[    0.574987]    IO 0x20003000..0x20012fff -> 0x00000000
[    0.575008]   MEM 0x20013000..0x2fffffff -> 0x20013000
[    0.604875] dra7-pcie 51000000.pcie_rc: link is not up
[    0.605045] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00
[    0.605058] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.605069] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.605079] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[    0.605112] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400
[    0.605155] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    0.605177] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    0.605244] pci 0000:00:00.0: supports D1
[    0.605253] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.605480] PCI: bus0: Fast back to back transfers disabled
[    0.605599] PCI: bus1: Fast back to back transfers enabled
[    0.605687] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
[    0.605701] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
[    0.605713] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.605945] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    0.605958] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
[    0.606081] aer 0000:00:00.0:pcie02: service driver aer loaded
[    0.662076] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.665480] console [ttyS0] disabled
[    0.665535] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250
[    1.622006] console [ttyS0] enabled
[    1.626426] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 302, base_baud = 3000000) is a 8250
[    1.636410] [drm] Initialized drm 1.1.0 20060810
[    1.641906] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.648602] [drm] No driver support for vblank timestamp query.
[    1.654762] [drm] Initialized vdrm 1.0.0 20110917 on minor 0
[    1.747569] loop: module loaded
[    1.751171] [camera_vsync_probe:66] [camera_vsync_probe:80] [camera_vsync_hrtimer_start:46]
[    1.762702] lp873x 0-0060: Failed to read OTP ID
[    1.767603] lp873x: probe of 0-0060 failed with error -121
[    1.773294] lp873x 0-0061: Failed to read OTP ID
[    1.777984] lp873x: probe of 0-0061 failed with error -121
[    1.783740] vmemexp device MAJOR num = 245
[    1.787867] vmemexp class registered
[    1.791578] /dev/vmemexp device registered
[    1.795738] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120
[    1.803332] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00,  0,  0
[    1.810808] libphy: Fixed MDIO Bus: probed
[    1.817400] mousedev: PS/2 mouse device common for all mice
[    1.833758] i2c /dev entries driver
[    1.838071] ov490 4-0024: Failed reading register 0x300a!
[    1.843549] ov490: probe of 4-0024 failed with error -121
[    1.853584] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    1.858427] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode
[    1.864919] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode
[    1.871301] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode
[    1.877696] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode
[    1.884094] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode
[    1.890716] vsys_3v3: supplied by evm_12v0
[    1.894890] evm_3v3: supplied by vsys_3v3
[    1.898947] evm_3v3_sd: supplied by evm_3v3
[    1.953456] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode
[    1.959842] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode
[    2.013052] pinctrl-single 4a003400.pinmux: bad data for mux pinmux_wlan_pins
[    2.020220] pinctrl-single 4a003400.pinmux: no pins entries for pinmux_wlan_pins
[    2.043321] pinctrl-single 4a003400.pinmux: bad data for mux pinmux_wlan_pins
[    2.050496] pinctrl-single 4a003400.pinmux: no pins entries for pinmux_wlan_pins
[    2.072990] omap_hsmmc 480d1000.mmc: Cannot get pinctrl
[    2.078286] omap_hsmmc: probe of 480d1000.mmc failed with error -22
[    2.093667] ledtrig-cpu: registered to indicate activity on CPUs
[    2.113840] NET: Registered protocol family 10
[    2.133302] sit: IPv6 over IPv4 tunneling driver
[    2.138500] NET: Registered protocol family 17
[    2.153216] Key type dns_resolver registered
[    2.157581] omap_voltage_late_init: Voltage driver support not added
[    2.173532] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    2.179740] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    2.203001] cpu0 supply vdd not found, using dummy regulator
[    2.208939] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    2.223009] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    2.229228] cpu0 supply vdd not found, using dummy regulator
[    2.253853] Power Management for TI OMAP4+ devices.
[    2.258977] Registering SWP/SWPB emulation handler
[    2.273352] dmm 4e000000.dmm: workaround for errata i878 in use
[    2.283575] dmm 4e000000.dmm: initialized all PAT entries
[    2.290214] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1
[    2.317891] hctosys: unable to open rtc device (rtc0)
[    2.326937] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.344290] aic_dvdd: disabling
[    2.347475] mmc0: Problem switching card into high-speed mode!
[    2.353363] vmmcwl_fixed: disabling
[    2.357613] mmc0: new SDHC card at address 0001
[    2.373076] mmcblk0: mmc0:0001 SD16G 14.6 GiB
[    2.379312]  mmcblk0: p1 p2
[    2.385087] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    2.395085] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    2.407837] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    2.415266] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    2.456514] mmc1: MAN_BKOPS_EN bit is not set
[    2.464993] mmc1: switch to bus width 2 failed
[    2.478070] mmc1: new HS200 MMC card at address 0001
[    2.494110] mmcblk1: mmc1:0001 IS004G 3.64 GiB
[    2.509491] mmcblk1boot0: mmc1:0001 IS004G partition 1 2.00 MiB
[    2.526826] mmcblk1boot1: mmc1:0001 IS004G partition 2 2.00 MiB
[    2.765330] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[    2.771515] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[    2.776921] EXT4-fs (mmcblk0p2): recovery complete
[    2.809364] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.817542] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.826429] devtmpfs: mounted
[    2.829626] Freeing unused kernel memory: 336K
[    2.834105] This architecture does not have kernel memory protection.
[    3.212025] systemd[1]: System time before build time, advancing clock.
[    3.269795] random: systemd: uninitialized urandom read (16 bytes read, 12 bits of entropy available)
[    3.284102] random: systemd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
[    3.295812] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    3.314381] systemd[1]: Detected architecture arm.
[    3.354906] systemd[1]: Set hostname to <dra7xx-evm>.
[    3.405177] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    3.472609] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
[    3.485708] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
[    3.507438] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
[    3.525023] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    3.886726] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    3.896349] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    3.906449] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    4.150557] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start
[    4.158455] systemd[1]: sysinit.target: Found dependency on alignment.service/start
[    4.166228] systemd[1]: sysinit.target: Found dependency on basic.target/start
[    4.173508] systemd[1]: sysinit.target: Found dependency on sysinit.target/start
[    4.180941] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start
[    4.190400] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start
[    4.225442] systemd[1]: Reached target Remote File Systems.
[    4.253703] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.283351] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.313486] systemd[1]: Listening on Network Service Netlink Socket.
[    4.345529] systemd[1]: Created slice User and Session Slice.
[    4.373372] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.403279] systemd[1]: Listening on udev Kernel Socket.
[    4.433358] systemd[1]: Listening on Journal Socket.
[    4.463424] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.493210] systemd[1]: Reached target Paths.
[    4.513265] systemd[1]: Listening on Syslog Socket.
[    4.533904] systemd[1]: Created slice System Slice.
[    4.567273] systemd[1]: Mounting Temporary Directory...
[    4.603644] systemd[1]: Reached target Slices.
[    4.635650] systemd[1]: Mounting POSIX Message Queue File System...
[    4.675565] systemd[1]: Starting File System Check on Root Device...
[    4.714437] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    4.727314] systemd[1]: Mounting Debug File System...
[    4.748849] systemd[1]: Created slice system-getty.slice.
[    4.798523] systemd[1]: Starting Load Kernel Modules...
[    4.807012] systemd[1]: Listening on udev Control Socket.
[    4.821834] systemd[1]: Reached target Swap.
[    5.057901] systemd[1]: Starting Journal Service...
[    5.070852] systemd[1]: Starting AVM starting...
[    5.091254] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.116306] systemd[1]: Starting Setup Virtual Console...
[    5.142205] systemd[1]: Mounted Debug File System.
[    5.152495] systemd[1]: Mounted POSIX Message Queue File System.
[    5.163721] systemd[1]: Mounted Temporary Directory.
[    5.182766] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[    5.196368] systemd[1]: Failed to start Load Kernel Modules.
[    5.202281] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[    5.220758] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[    5.232409] systemd[1]: avm.service: Main process exited, code=exited, status=203/EXEC
[    5.251599] systemd[1]: Failed to start AVM starting.
[    5.257552] systemd[1]: avm.service: Unit entered failed state.
[    5.283758] systemd[1]: avm.service: Failed with result 'exit-code'.
[    5.294534] systemd[1]: Started File System Check on Root Device.
[    5.334798] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.374676] systemd[1]: Started Setup Virtual Console.
[    5.403983] systemd[1]: Started Journal Service.
[    5.835302] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.704886] systemd-journald[116]: Received request to flush runtime journal from PID 1
[    7.541146] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma
[    7.593119]  remoteproc0: 58820000.ipu is available
[    7.598037]  remoteproc0: Note: remoteproc is still under development and considered experimental.
[    7.730552]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    7.824219] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma
[    7.885965]  remoteproc1: 55020000.ipu is available
[    7.890872]  remoteproc1: Note: remoteproc is still under development and considered experimental.
[    8.004152]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    8.132408] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma
[    8.196700]  remoteproc2: 40800000.dsp is available
[    8.262732]  remoteproc2: Note: remoteproc is still under development and considered experimental.
[    8.319778]  remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    8.420040] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[    8.451170] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20
[    9.122371]  remoteproc0: registered virtio0 (type 7)
[    9.167038]  remoteproc1: registered virtio1 (type 7)
[    9.310689] CAN device driver interface
[    9.321807] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[    9.399788] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[    9.489420] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[    9.546768] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=345)
[   10.096664]  remoteproc2: registered virtio2 (type 7)
[   11.141021] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.727305]  remoteproc0: powering up 58820000.ipu
[   11.786910]  remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 7913704
[   11.804711] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1
[   11.885177]  remoteproc0: remote processor 58820000.ipu is now up
[   11.907471] virtio_rpmsg_bus virtio0: rpmsg host is online
[   11.922044]  remoteproc1: powering up 55020000.ipu
[   11.937826]  remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743164
[   11.963121] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1
[   11.979552] omap-rproc 55020000.ipu: dma_alloc_coherent err: 45088768
[   11.994663]  remoteproc1: Failed to process resources: -12
[   12.012317]  remoteproc1: rproc_boot() failed -12
[   12.025206] virtio_rpmsg_bus: probe of virtio1 failed with error -12
[   12.044008]  remoteproc2: powering up 40800000.dsp
[   12.067243]  remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 7045692
[   12.093529] omap_hwmod: mmu0_dsp1: _wait_target_disable failed
[   12.099430] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0
[   12.105392] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0
[   12.187882]  remoteproc2: remote processor 40800000.dsp is now up
[   12.202251] virtio_rpmsg_bus virtio2: rpmsg host is online

 

↧

Compiler/TDA2EX17EVM: single camera usecase for capturing

November 25, 2019, 9:58 pm
$
0
0

Part Number: TDA2EX17EVM

Tool/software: TI C/C++ Compiler

Hi Sir

I still some questions over TI-RTOS.

1. Which utility can I use to know the capturing data? Or which buffer can I print to know the camera is capturing for usecase-framecopy? I want to know whether camera is working and capturing.

2. I use usecase-framecopy and have a algorithm API-AAA(*ptr) that want to call by buffer address of framecopy. Which buffer can I call for our AAA(*ptr) - ptr?  

Thanks so much

Best Regards,

Jacob

↧
↧

CCS/CC1310: How to add RF address filter to Wake On Radio sample project

November 25, 2019, 9:59 pm
$
0
0

Part Number: CC1310

Tool/software: Code Composer Studio

Hi, is it possible to add RF address filter to the simplelink cc1310 sdk rfWakeOnRadioRx project?

I would want to have a host cc1310 to send the wake packet to specific cc1310 slave board. So ideally I would want the slave to only wake up to packets that are meant for them.

Any example would be great.

Thanks.

↧

TPS63806: Shutdown quiescent current

November 25, 2019, 10:00 pm
$
0
0

Part Number: TPS63806

Hi,

In our application, TPS63086 is selected to meet requirements below, at the moment, is it the best PN?

1, Input: 3.3V - 3.8V (Li-Ion rechargeable battery).

2, Output: 3.8V (typical), maximum 400mv voltage drop for load 2A pulse current.

Also, what's the quiescent current in shut down mode? Thanks.

Regards,

Ma Dawei

↧
Search

AWR1642: RX gain setting for each RX path individually

November 25, 2019, 10:02 pm
$
0
0

Part Number: AWR1642

Hi Sir,

Is it possible to apply the different RX gain value to each RX path individually (i.e. RX1,RX2,RX3 and RX4) within AWR1642?

Thanks, 

Stanley

↧

ADS1292RECG-FE: How to save measured data to a file (ADS1x9xECG-FE Demonstration Kit)

November 25, 2019, 10:02 pm
$
0
0

Part Number: ADS1292RECG-FE

Hello

I bought a ADS1292R EVK board ( ADS1x9xECG-FE demonstration Kit)

This board operates at 3V analog and 3.3V digital by USB 5V power

By the way I want to use coin battery (3V)

So I plan to use a step-up IC to make 3.3v.

Have you ever run it like this?

Does this have any problem with power supply noise?

Or is there another way to use coin batteries?

Thank you

↧
↧

TPS2372: Please help to check dual signature application

November 25, 2019, 10:03 pm
$
0
0

Part Number: TPS2372

Hi expert,

For this data page 20, does PSE use 2 different RJ45 or 2 different channels? 

We concern that the VDD of 2 PSE channels, VDD1 of TPS2372(PD1) and VDD2 of TPS2372(PD2) are connected together.

When PD1 finish the handshaking, the VDD2 of PD2 will be pulled up to 54V, it will make PD2 handshaking fail. Like the attached waveform.

Channel3 finished the handshaking and power on, at the same time Channel is pulled up to 54V.

Is my reasoning right?

(Please visit the site to view this file)

↧

FDC2214EVM: I asked about question "Please tell me about the value when using Data Streaming of GUI." before

November 25, 2019, 10:03 pm
$
0
0

Part Number: FDC2214EVM

I asked a question before and got the answer.
I have responded to the results of the response, but have you received it?

I'll send it again.
I would appreciate your answer.

Regards,

＜question before＞

I use FDC2214EVM for a touch sensor of a robot.

From the terminal of the evaluation board, 
I extend the sensor electrode pad with a cable and paste it inside the robot.
I confirm changes in capacitance when the electrode pad is touched by hand from outside 

When measuring using [Data Streaming] of GUI 
It shows 53pF when not touching the sensor, and 0.1 ~ 0.5pF capacitance increases when touching from outside.

My concern is that the sensor is reacting, but this 0.1 ~ 0.5pF is probably too small.

Can you tell me because I don't know if it's weak?

Regards

＜Conditions＞

Electrode size: 5mm x 10mm
Electrode thickness:0.2~0.3mm
Robot material: Plastic
Robot thickness: 0.2 ~ 0.3mm
Cable length: 10cm

<Configuration,DataStreaming>

＜answer＞

Whether or not your target response is too small depends on your noise floor. You can measure your noise floor using the following steps:

  1. To measure the noise floor using an evaluation module, first download and open the Sensing Solutions GUI. For more detailed installation instructions, see the User’s Guide associated with the EVM.
  2. Once the GUI is open, navigate to the Configuration tab. Configure the RCOUNT setting so that the LDC or FDC device will sample the sensor frequency at the desired rate. Note: for non-default sensors, at this point the user will need to use an oscilloscope to verify that the sensor oscillation amplitude and the sensor frequency are within the acceptable range for the specific device, as specified in the datasheet. If the sensor oscillation amplitude is outside of the recommended range, the sensor drive current will need to be modified. Please see the Register Map in the datasheet for the registers that control the drive current settings. If the sensor oscillation frequency is outside of the frequency range supported by the device, either the inductor or the capacitor in the LC tank will need to be modified.
  3. Next, navigate to the Data Streaming tab.  Click the “Start Streaming” button to begin the noise floor measurement. Ensure that the graph displays “Detected Sensor Frequency (MHz),” which is controlled by the drop down menu in the upper left corner. Click on the “Show Statistics” button to display the average and standard deviation of the data. Increase the number of decimals of the standard deviation until the last digit is rapidly changing. Use three times the standard deviation as the noise floor.
We recommend that your SNR is at least 10 for robust sensing.
Best Regards,

Kristin Jones

Current and Position Sensing

Applications Engineer

＜result to answer＞

Hi! Kristin

Thank you for answering kindly.

I checked step 1,2,or 3 you instructed.

Regarding Step 3 [Detected Sensor Frequency], the value is 5.332MHz when not touched, and the graph below shows when touched.

There are three questions.

① What does the noise floor mean?
Is this Detected Sensor Frequency related?

② If the standard deviation is 3 times, will the noise floor value be 0.033(0.011 × 3) based on this graph?

③ Where should I check if the SNR is 10?

I would appreciate your reply.

< 1:touch 2:no touch>

↧

TPS65268-Q1: SW pin negative pulse is very big

November 25, 2019, 10:04 pm
$
0
0

Part Number: TPS65268-Q1

Hi Team,

My customer use the TPS65268-Q1 and found that the SW pin negative pulse is  very big.

1）DDR=1.5V

2）VDDARM-1.37V

3）3.3VK

At present, no obvious problems have been found in the schematic diagram.

In layout, Vin and input capacitor are placed in the bottom layer; inductance and output capacitor are placed in the top layer. Input power loop is long, and it may be one of the reasons.

In addition, when adding RC to the ground (10R+1nF)  in SW PIN , and no significant improvement was found.

Please help to confirm the problem, thank you!

↧
Viewing all 262198 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>