Regarding TPS7A6350
Dear, Sir.I would like to make sure following points.1) TPS7A6350 has current limit and foldback function. I wonder It will execute current limit, then foldback to Iout max? I think No meaning...
View ArticleProgramming problem
Hi,First ,sorry for my bad English.When I try to program the CC8520, the PPWC shows Flash Erase Failed . I check the ppw_programmer.log file,it shows:Reset(doSpiReset=0, enterSpiLoader=1) ->...
View ArticleDifference between OMAPL137DZKBA3 and OMAPL137BZKBA3
There is a partnumber OMAPL137DZKBA3. But there is not any information about it in datasheet. I see that it is new silicon revision, but where i can get the information about changes?Are OMAPL137DZKBA3...
View ArticleCC8520 Flash erase failed
Hello,I tried to programm CC8520 with CCDebugger and get the error message "Flash erase failed". Device-ID is read by CCDebugger correctly, do I have any chance to programm CC8520?RegardsAlex
View ArticleBLE Osal_Timers
HiHow many timers can be run at a time in a BLE application?When can osalAddTimer time fail?Should the program delete a used timer (osalDeleteTimer) after timeout? or the same timer could be reused...
View ArticleAM335x-ICS empty NDK toolchain dir : HowTo
Hi, I'm trying to make some C code work on Android. So, the only way I found was NDK.and now I'm struggling in making my first step to the NDK, as I can't find any prebuilt NDK toolchains needed for...
View Articletps65911x gpio bug
I was trying to use one of the gpios on the tps659113 on our custom board. I noticed that the gpio functions use tps65910_clear_bits(), defined in linux drivers/mfd/tps65910.c. It has the line:data...
View ArticleCC112x: dependies of CH.BW, Symbol rate and Deviation
Looking for optimum settings S.Studio gives some hints if I break rules like Ch.BW > 2x symbol rate.But what are the real dependencies, what's the theory behind?If I understand that, I'm able to...
View ArticleZ-stack Zigbee Light Link Copy Scene(all scenes) Bug Fix
Dear TI/TopCAT,According to the ZLL spec 6.5.1.3.4 Copy scene command,The copy all scenes subfield is 1-bit in length and indicates whether all scenes are to be copied. This functionlity is not working...
View ArticleEZSDK-DM814x-EVM demo capture error
Sir, I am using prebuild EZSDK-DM814x-EVM image (version : 5_05_02_00) on the DM8148-EVM and i am using LCD for display & USB camera for capture. I can play the demo videos through the demo...
View Articlebi-directional stereo with CC85xx Development Kit
Hi, I'm having troubles with configuring the evaluation boards; I want to have a bi-directional stereo working although the configurations do not seem to be working for me. I managed to get mono...
View ArticleZ-stack light link 1.0.1-bug reopened in latest release -
Dear TI/TopCat, The Bug reported in http://e2e.ti.com/support/low_power_rf/f/158/p/248017/869835.aspx#869835reponed in latest release 1.0.1 the fix mentioned below not workingvoid zll_InitVariables(...
View ArticleAM3359 UART4 FIFO threshold trigger not working
Hi, We are using AM335X_StarterWare_02_00_00_07 and have been using UART4 in UART Mode using simple polling with no problem. We noticed that on some large incoming data from the UART we were not...
View Articlecl6x -c -o does not rename object files
I have C6000 Code Generation Tools 7.4.2 for Windows (and have verified same behavior back to 7.2.4).If I docl6x.exe -mv6600 -c -o foo.obj temp.cI expect it to create foo.obj. But it creates...
View ArticleSYS/BIOS on Pandaboard
Hi all!!Is it possible to install SYS/BIOS on Pandaboard?? If yes, how to accomplish it?I have a linux driver to port to SYS/BIOS. I need to install SYS/BIOS on the padaboard for loading this driver...
View ArticleRunning the FFT Code from the ARM CMSIS project on LM3S608
Hello, I am trying to run the FFT example code from the ARM CMSIS (downloaded from here). I am using a Eclipse Code Sourcery based toolchain. I compiled the source of the ARM CMSIS project using these...
View ArticleStack overflow when calling NDK function fdSelect()
HiI am using NDK 2.20.04.26 and am working with the NDK helloWorld example.I have added code to poll an open TCP/IP socket for data, using fdSelect:timeval timeOut;timeOut.tv_sec = 0;timeOut.tv_usec =...
View ArticleFlash a boot code to SPI flash on AM180x?
I'm using AM1802 with SPI boot mode. I would like to write initial boot code to blank SPI flash by JTAG emulator.I was able to burn my code with using SPIWriter and XDS100v2, but it's needed to change...
View ArticleDVR RDK Grpx frame buffer question
I am using DVR RDK on dm8168, how do I modify such that the same frame buffer on GRPX0 can be shown on both the HDMI and DVO2 output? just like HDCOMP and DVO2 are showing the same frame GRPX1,Thanks
View ArticleRestore bootloader on TMDXICE3359
Hi community,I am trying to get familiar with the TMDXICE3359 product. I am facing a problem since yesterday, so here I a : I can't manage to put a (working?) bootloader on the EVM ICE board.I am using...
View Article