Quantcast
Channel: Forums - Recent Threads
Browsing all 262198 articles
Browse latest View live

CC3220SF: Full manual for CC3220SF

Part Number: CC3220SFHello,Is there a full user manual for this chip?   The closest detailed (I thought) I found is SWAS035B – SEPTEMBER 2016 – REVISED NOVEMBER 2018, CC3220R, CC3220S, and CC3220SF...

View Article


Leakage current issues of Schottky Diode

Dear Sir,I need a function to detect the DC cable that plug or not plug.My simple circuitVin=4V connect Diode_P;   Diode_N connect a super- super cap.My test procedure:1: DC power on and charge the...

View Article


Compiler/TM4C129ENCPDT: Getting terminated

Part Number: TM4C129ENCPDTTool/software: TI C/C++ CompilerHi all,my code is going into Error:E_usageFault: INVPC: Invalid PCError:E_memFault: IACCVIOL: Instruction Access Violation, address:...

View Article

ADS1299: Channel cross talk on floating inputs

Part Number: ADS1299Hi Folks,I have a board with ADS1299 with common mode LP filter (2.2k || 4.7nF - C0G) on each inputs (Input0-7 and SRB1 too).configured the device to use SRB1 as common inputonly 2...

View Article

Image may be NSFW.
Clik here to view.

LM5022: Monitor and control for LED driver application

Part Number: LM5022I designing LM5022 with LED driver application, based on application note: snva282b and snva229a.I want to attach additional specification below, is there any reference design or...

View Article


AM5749: TIDL ONNX model

Part Number: AM5749Hi,Is there a trained model that works with ONNX in TIDL?If the following seems to be open, please tell me where to get it.1.ONNX model (*. onnx)2.import...

View Article

MSP430F5529: SPI Interfacing

Part Number: MSP430F5529Hi Experts,I'm interfacing some device so for that I'm using port 4.0, 4.1, 4.2, 4.3. Can anyone say how do I configure because I have very little experience with MSP430...

View Article

TPS709: Reverse Current Waveform

Part Number: TPS709Hi,I am asking on behalf of a customer that uses the TPS70933 in a battery powered application to step-down the voltage from 9V input to 3.3V.When testing, the output of the TPS70933...

View Article


Light load efficiency

Hi all,During light load condition, the DC-DC converter are operated in1. Pulse skipping mode2. Burst mode.Of these both mode of operation, which one is more effective and why?

View Article


IWR1443BOOST: CW raw data capture

Part Number: IWR1443BOOSTHello there,I would like to use the IWR1443BOOST to collect "simple" IQ raw data (just center frequeny without frequency modulated ramp instead of FMCW). Besides that, I also...

View Article

DS90UB913Q-Q1: GPIOs configuration between serilaizer and deserializer

Part Number: DS90UB913Q-Q1Hi,We are using DS90UB913Q serializer and DS90UB914Q as deserializer through LVDS interface for Camera module.Can we control GPIO pins at serilaizer using GPIO pins at...

View Article

LM43600: Reference Design PMP9546 - will the battery discharge through the...

Part Number: LM43600Looking at reference design PMP9546  (Schematic at http://www.ti.com/lit/df/tidr919/tidr919.pdf ) I have a question that needs some information about the internals of the LM43600....

View Article

BQ25890: Shipping mode condition

Part Number: BQ25890Dear Support team,When BATFET_DIS is set from 0 to 1 at USB_VBUS active, it does not immediately enter the shipping mode, but when USB_VBUS is turned off, it seems that it enters...

View Article


TAS6422-Q1: Class D amp Output Feedback

Part Number: TAS6422-Q1The device doesn't have the feedback pin from output.When voltage of the car battery is changed, how does the device keep the output gain?Can you explain this for technical level?

View Article

BQ40Z80: LED blinking option for state of charge reversed

Part Number: BQ40Z80Hi all,I have an issue with LED blinking option for state of charge, in fact I have this result : (assuming the segmentsprogrammed are 0%, 20%, 40%, 60%, 80%, and 90% of RSOC), the...

View Article


Image may be NSFW.
Clik here to view.

TLV521: Clipping of waveform with Low & high pass filter

Part Number: TLV521Have attached a ckt, basically its a low pass filter of 240Hz & then high pass filter of 10Hz. Can someone tell why output of HFP filter is getting clipped. Is it due to...

View Article

CCS/AM5728: I2C can't transmitt, unable to write I2C_DATA

Part Number: AM5728Tool/software: Code Composer StudioHi Team !I'm struggling with an I2C issue, I've follow the Datasheet (from p.5740) and I've inspire my code from...

View Article


TAS6422-Q1: How TAS6422 works in PBTL mode

Part Number: TAS6422-Q1Let me confirm the waveform of output.Do OUT4P and OUT4M output the same waveform in PBTL mode?and aslo, Do OUT4P and OUT4M output the reversed waveform each other in BTL...

View Article

TPS3890: Sense Pin pull-up and pull-down values and MR input sensitivity

Part Number: TPS3890I am planning to use TPS389001 adjustable sense version to generate Power ON RESET to my ASIC.I have 2 questions on thisMy case:VDD = 3.3V (comes 1st in power sequencing)Vsense =...

View Article

LM25116: Is there any other setting which will impact the over current...

Part Number: LM25116Hi,My customer checked with me ,except for the current sense resistor, is there any other setting or factor will impact the over current detection?  thanks. 

View Article
Browsing all 262198 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>