Part Number:TMDSDOCK28035
Tool/software: Code Composer Studio
Dear Sir,
We had purchased TMDSDOCK28035 experimenter kit. The hardware emulator on the kit is XDS100 type. We have been using CCS version 4 since the emulator was listed only in CCS-4 i.e we could find "Texas Instruments XDS100v1 USB emulator " connection only in CCS4 target configuration. CCS 7 connection does not list "Texas Instruments XDS100v1 USB emulator ". We tried installing the required CG tools package and drivers. We got the serial number of the debug probe by running XDS100serial.exe file. We are able to build the project file. But while trying to debug, the following error is constantly occuring :
Error connecting to the target:
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Release 5.0.429.0)
(Error -1135 @ 0x0)
The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation.
(Release 5.0.429.0)
Now our question is
1) whether CCS7 can be used with XDS100 emulators or not?
2) If yes, then are there any additional packages to be installed along with CCS7 and what are they?
3) Also on the control card there are two switches SW2 and SW3. What should be their positions while flashing the code?
4) Can we purchase a standalone XDS110 emulator and connect it to the 14 pin JTAG emulator on the docking station? will it work?
5) Will XDS110 work with CCS7 and a 64bit Windows 10 OS?
Thankyou
