Part Number:TMS320F2808
Hii,
Board: TMS320F2808
This board contain 6-ePWM pins i.e (EPWM1, EPWM2, EPWM3, EPWM4, EPWM5, EPWM6), out of which 2-ePWM pins not producing pulse signal i.e (EPWM5A, EPWM5B, EPWM6A, EPWM6B). Due to this problem i have refer the "eZdsp_F2808_Technical_Reference_Guide.pdf", mention that the pin is [MUX_GPIO8, MUX_GPIO9, MUX_GPIO10, MUX_GPIO11] and the other 4-pins define as a GPIO0 to GPIO7.
In reference_manual has written EPWM1 to EPWM6 is present in-between GPIO0 pin to GPIO11 pin.
Here i have attached the reference_guide screen-shoot of the ePWM belong to I/O interface board pins.
Kindly co-operate with me to find the solution.
