Part Number:TPS3808
Hi,
I have questions about setting the reset delay time.
When CT=100pF,in the data sheet switching characteristics, td is 1.25 ms(TYP).
The calculation result of the equation is 1.071 ms.
Delay = 100×10^(-3)/175 + 0.5×10^(-3) = 1.071 ms
Q1.What is the difference?
I would like to set td for at least 1.2 seconds using a 330nF capacitor.
Q2.What is the maximum / minimum value of td in this case?
Best regards,
Seishin