TPS65982: Asking for the TPS65982 VBUS cap design

Part Number:TPS65982

Hi Team,
Customer mass production NB design 0.47uF*4 on the VBUS.
TI TPS65982 EVM uses 0.01uF*4 and one 1uF cap on the VBUS.

Is that ok to use 0.47uF on the VBUS? due to it is the mass production project, customer cannot change the schematic and layout. If four 0.47uF is not suggested, could you suggest the four capacitor value to cover this case? Any concern for this cap 0.47uF design?

Thanks,
SHH