Tool/software: Linux
Hi,
i have the BSL Scripter running on ARM CPU and want to program the MSP432 via UART.
I am using the example provided on source code and i am getting this error:
---------------------------------------------------------
BSL Scripter 3.2.1
PC software for BSL programming
2017-Jun-06 10:44:17
---------------------------------------------------------
Input file script is : /home/devel/MSP432/SourceCode/MSP432/script_MSP432_uart.txt
//
//Script example MSP432 UART BSL
//Device : MSP432P401R
//Download blink application to
//MSP432 device through UART BSL
//
LOG
MODE P4xx UART 9600 /dev/ttymxc3 PARITY
Initialization of BSL P432 succeed!
CHANGE_BAUD_RATE 115200
RX_PASSWORD_32 pass256_wrong.txt
Read Txt File : /home/devel/MSP432/SourceCode/MSP432/pass256_wrong.txt
[ERROR_MESSAGE]BSL Password is error!
RX_PASSWORD_32 pass256_default.txt
Read Txt File : /home/devel/MSP432/SourceCode/MSP432/pass256_default.txt
BSL Password is correct!
MASS_ERASE
Mass Erase is successful!
RX_DATA_BLOCK_32 Blink_LED.txt
Read Txt File : /home/devel/MSP432/SourceCode/MSP432/Blink_LED.txt
[ACK_ERROR_MESSAGE]Header incorrect!
Time elapsed of writing 512 bytes : 0.0544 seconds
Speed of writing data :9.191(kB/s)
//RX_DATA_BLOCK_32 Blink_LED.hex
TX_BSL_VERSION_32
[ACK_ERROR_MESSAGE]Header incorrect!
TX_DATA_BLOCK_32 0x0000 0x4000 ReadBlock_MSP432P401R.txt
Write Txt File : /home/devel/MSP432/SourceCode/MSP432/ReadBlock_MSP432P401R.txt
[ACK_ERROR_MESSAGE]Header incorrect!
terminate called after throwing an instance of 'std::out_of_range'
what(): vector::_M_range_check: __n (which is 67100) >= this->size() (which is 67100)
Any idea?