My custom DM6446 board fails to boot from NAND, only get BOOTME, similar to this post:http://e2e.ti.com/support/embedded/linux/f/354/t/52934.aspx
NAND chip is ONFI compliant MT29F1G08ABADAH4.
ubl and u-boot can be flashed in to NAND with NANDWriter.out or sfh_dm644x.exe.
Use slh_dm644x.exe to load ubl from DM644x_FlashAndBootUtils_2_0, successfully boot the u-boot in NAND.
I rebuild ubl and load & run it in IRAM with ccsv5, to make sure the chip is ONFI compliant.
Is there a symbol file of RBL to help debuging RBL in ccs?
Best Regards,
Zhang Jiajun