Read from a CompactFlash (GPMC)

Hello everyone,

I'm using OMAP3530 and I'm trying read from a CompactFlash. I would know where the data read are stored. The manual of OMAP3530
indicate that the read access is achieved if I read the register GPMC_NAND_DATA_i(i=3, Chip Select = 3).
I configure the configuration registers of GPMC and the configuration registers of the pads. Of course, the CS3 is activated and others CS are off.
The value of the GPMC_NAND_DATA_3 and of the all of the CS3 space address is 0x008B008B. 0x008B008B is an address of the CS0 space address, and if I read this address an abort appears.
I don't know where the data read are stored.

Thanks,

Alejandro