HI,
I am trying to do the C2000 hardware Capactive touch demo on the LED BoosterPack.
Issue is it appears to have conflicting directions on the documentation (neither work after I loaded the demo code in ControlSuite called,
File: f2802x_examples/LED_Boost_CapTouch/LED_Boost_CapTouch_Main.c
![]()
The User Guide tells me not to have jumpers on the LaunchPad, but the Wiki has the reverse.
The User Guide
4.2.1 Hardware Setup for Capacitive Touch Demo Perform or verify the following steps to prepare the LED BoosterPack for use with the MSP430 Capacitive Touch BoosterPack. 1. Verify the following jumper and switch settings on the LED BoosterPack:
(a) A jumper is not placed on J2.
(b) A jumper is not placed on J8.
(c) The switch S1 is in the up position. 2. Verify the following jumper and switch settings on the C2000 LaunchPad:
(a) A jumper is placed on JP1.
(b) A jumper is placed on JP2.
(c) A jumper is placed on JP3.
(d) Switches in S1 are all in the up position.
(e) The switch S4 is in the down position. 3. Insert a C2000 LaunchPad into the header marked J3, J9 and J4, J10 on the LED BoosterPack.
4. Insert an MSP430 Capacitive Touch BoosterPack onto the headers marked J6 and J7.
5. Connect the LED BoosterPack to the included power adapter and plug in the adapter to the mains power.
6. Connect the LaunchPad to the PC using the USB cable included with the C2000 LaunchPad. | the Wiki
Hardware Setup for Capacitive Touch Lighting Demo To prepare the C2000 LaunchPad for the demo do the following:
(a) No jumper is placed on JP1.
(b) No jumper is placed on JP2.
(c) No jumper is placed on JP3.
(d) Move all switches in S1 to the up position.
(e) Move switch S4 to the down position. To prepare the LED BoosterPack for the demo do the following:
(a) Place a jumper on J2.
(b) Place a jumper on J8.
(c) The switch S1 is in the up position. Once the switches and appropriate jumpers have been placed on the LED BoosterPack and the C2000 LaunchPad do the following: - Insert a C2000 LaunchPad into the header marked J3, J9 and J4, J10 on the LED BoosterPack.
- Insert an MSP430 Capacitive Touch BoosterPack onto the headers marked J6 and J7.
- Connect the LED BoosterPack to the included power adapter and plug in the adapter to the mains
power. - Connect the LaunchPad to the PC using the USB cable included with the C2000 LaunchPad.
|
| |
Neither one of the configurations does the Cap Touch BoosterPack light up (like it does with the MSP430 LaunchPad to let us know that it's receiving power).
Can someone confirm the correct hardware configuration for the Capactitive Lighting Demo?
