Part Number: CC2642R
Team,
My customer who employs the CC2642 for the monitoring system is facing a strange behavior of the RSSI reading (using SmartRF Studio). This system uses the CC2642s in very close proximity.
PHY | RSSI[dBm] | PER[%] |
1M PHY(basic rate) | -26.0 | 0.0 |
Coded PHY with S=2 | -10.1 | 0.0 |
Coded PHY with S=8 | -10.1 | 0.0 |
From my experience, the RSSI has about 70dB range from -27dBm to -97dBm normally. The result of the Basic rate (1M PHY) is reasonable, I believe. However, the result above displays -10.1 dBm when the Coded PHY is used.
Is it the expected result?
Could I have your comment?
Regards,
Nonaka
