Dear Spacialists,
My customer is considering TDC7200 for LIDAR.
He has question about multiple reflected signal measurement.
Could you please advise?
(1) The datasheet of P1. says "supports up to 5 signals",
He thinks this means multiple reflected signal.
On the other hand, datasheet P.5, 7.3 recommended Operating Conditions of Minimum Time between 2 stop signals, describes minimum 67ns.
In case of LIDAR, 67ns means 3 x 10^8 x 67 x 10^(-9) = 20.1m.
TDC7200, when using multiple optical reflection, can't it measure less than 20.1m?
(2) Do you have any solution for reducing minimum time between 2stop signals 67ns?
If it can't be impossible, it seems to be not suitable for LIDAR.
I appreciate your great help.
Best regards,
Shinichi