Part Number: HDC2080
Hi
I would like to ask you about HDC2030CH about setting accuracy.
According to the specification, it can be set to 8bit,11bit and 14bit. As far as I understand, this register has a total of 16bit. If it is set to 11bit, the remaining 5bit should be kept at 0.
However, I saw in the specification that the temperature register was fixed at 14bit, and only the low 2 bits were kept at 0. In the actual test situation, as mentioned before, the temperature register was set at 11bit, and the remaining 5 bits could not be guaranteed to be 0, and only the last two bits were 0.
So, my question is, does 11bit work?Why don't we have 11 bits and zero bits?
