Part Number: AFE7769EVM
Hello Team,
I have a customer having trouble bringing up the AFE7769EVM. Can you please take a look at the following and provide your feedback.
I installed AFE7769EVM and TSW14J56 software and GUI, applied 10MHz clock (0dBm signal level, please let me know what the signal level should be) to LMK CLK IN (also, please let me know if 10MHz should be applied to LMK CLK IN) and followed the steps in section 4 of “AFE77xxEVM User's Guide” document.
Up to section 4.4, everything looks good. However, after running basicBringup.py the following errors and warnings were reported. I ran the basicBringup.py for the second time as mentioned in the document and got same errors and warnings. The log files for both tries are attached.
Could you please review the log files and let me know why these errors and warnings are reported?
Please note that after running the basicBringup.py the AFE7769EVM board draws around 2.6A that is close to what is mentioned in the 4.4 section.
Image may be NSFW.
Clik here to view.
(Please visit the site to view this file)(Please visit the site to view this file)
