Part Number:IWR1443BOOST
Could someone help with the problem i am facing. I am using Radar Studio v1.7.4.0 with mmwave dfp v07.04 according to the raw data capture presentation located here https://training.ti.com/mmwave-sensor-raw-data-capture-using-tsw1400-board. I am using the TSW1400 Rev D with the mmwave Dev pack and the IWR1443 Boost Rev B.
I encounter a RESP TIMEOUT error when pressing the RF power-up button when trying to connect to the board using radar studio
Below is the text from the output section and attaches is a picture of the UI:
GM: Constructor
GM: Wed Jun 19 11:00:18 2019
RSTD.Transmit("/Settings")
[11:00:19]
[11:00:19] ### Running Startup script: "C:\ti\mmwave_dfp_00_07_00_04\rf_eval\radarstudio\Scripts\Startup.lua" ###
[11:00:19] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[11:00:19] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[11:00:19] Scripter ignored: Attempt to UnBuild() again or before Build.
[11:00:19] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_dfp_00_07_00_04\\rf_eval\\radarstudio\\Clients\\\\LabClient.dll")
[11:00:19] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[11:00:19] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[11:00:19] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[11:00:19] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[11:00:19] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[11:00:19] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_dfp_00_07_00_04\\rf_eval\\radarstudio\\RunTime\\SAL.dll")
[11:00:19] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[11:00:19] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[11:00:19] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[11:00:19] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[11:00:19] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[11:00:19] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[11:00:19] RSTD.Transmit("/")
[11:00:19] RSTD.SaveSettings(): Settings saved to "C:\Users\AppData\Roaming\RSTD\config.xml"
[11:00:19] RSTD.Build()
[11:00:19] RSTD.SaveSettings(): Settings saved to "C:\Users\AppData\Roaming\RSTD\config.xml"
[11:00:19] RSTD.Transmit("/")
[11:00:19] RSTD.AL_Build()
[11:00:19] RSTD.AL_LoadXml()
[11:00:19] RSTD.Transmit("/")
[11:00:19] RSTD.AL_Init()
[11:00:19] RSTD.Clients_Build()
[11:00:19] GM: Init
[11:00:19] GM: Loaded 'C:\ti\mmwave_dfp_00_07_00_04\rf_eval\radarstudio\Clients\\LabClient.dll'
[11:00:19] GM: 1 Guest (s) init
[11:00:19] GM: 1 Module(s) init
[11:00:19] GM: 2 Tab (s) init
[11:00:19] RSTD.Client_LoadXml()
[11:00:20] [RadarAPI]: Starting Matlab Engine..
[11:00:31] [RadarAPI]: Matlab Engine Started!
[11:00:33] [RadarAPI]: ar1.LoadSettings('C:\Users\AppData\Roaming\RSTD\ar1gui.ini')
[11:00:34] TESTING = false
[11:00:34]
[11:00:34] ***Script completed successfully.***
[11:00:57] [RadarAPI]: Opening Gpio Control Port()
[11:00:57] [RadarAPI]: Status: Passed
[11:00:58] [RadarAPI]: Opening Board Control Port()
[11:00:58] [RadarAPI]: Status: Passed
[11:00:59] [RadarAPI]: ar1.FullReset()
[11:00:59] [RadarAPI]: Status: Passed
[11:00:59] [RadarAPI]: Closing Board Control Port()
[11:00:59] [RadarAPI]: Status: Passed
[11:00:59] [RadarAPI]: Closing Gpio Control Port()
[11:00:59] [RadarAPI]: Status: Passed
[11:00:59] [RadarAPI]: ar1.SOPControl(2)
[11:00:59] [RadarAPI]: Status: Passed
[11:01:04] [RadarAPI]: ar1.Connect(14,115200,1000)
[11:01:05] [RadarAPI]: ar1.Calling_IsConnected()
[11:01:05] [RadarAPI]: ar1.SelectChipVersion("XWR1443")
[11:01:05] [RadarAPI]: Status: Passed
[11:01:06] [RadarAPI]: ar1.SelectChipVersion("XWR1443")
[11:01:06] [RadarAPI]: Status: Passed
[11:01:06] [RadarAPI]: ar1.SaveSettings('C:\Users\AppData\Roaming\RSTD\ar1gui.ini')
[11:01:13] [RadarAPI]: ar1.DownloadBSSFw("c:\\ti\\mmwave_dfp_00_07_00_04\\rf_eval\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss.bin")
[11:01:13] [RadarAPI]: Downloading BSS ROM Legacy Binary..
[11:02:40] [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_dfp_00_07_00_04\\rf_eval\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss.bin")
[11:02:40] [RadarAPI]: Downloading MSS Legacy Binary..
[11:03:04] [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[11:03:04] [RadarAPI]: Unknown Async event recieved(0)
[11:03:04] [RadarAPI]: Status: Passed
[11:03:04] [RadarAPI]: ar1.SaveSettings('C:\Users\AppData\Roaming\RSTD\ar1gui.ini')
[11:03:13] [RadarAPI]: ar1.RfEnable()
[11:03:13] [RadarAPI]: Status: Failed, Error Type: RESP TIMEOUT
[11:03:23] [RadarAPI]: ar1.RfEnable()
[11:03:23] [RadarAPI]: Status: Failed, Error Type: RESP TIMEOUT
[11:03:27] [RadarAPI]: ar1.RfEnable()
[11:03:27] [RadarAPI]: Status: Failed, Error Type: RESP TIMEOUT
[11:03:34] [RadarAPI]: ar1.RfEnable()
[11:03:34] [RadarAPI]: Status: Failed, Error Type: RESP TIMEOUT
