Part Number:INSTASPIN-BLDC
Hi,
Is there any recommended example about FAST sensorless solution to run this two motors?
We are failed to make it run. It has already enabled motor parameter identification.
When measuring motor parameters, it stopped directly when measuring rotor flux linkage. Thanks a lot.
Motor | Motor1 | Motor2 |
Number of pole-pairs | 7 | 4 |
Stator resistor: Ohm | 2.7 | 2.8 |
Stator inductance：mH | 1.3 | 0.85 |
Rotor flux | Unknown | Unknown |
rated voltage：V | 12 | 12 |