Part Number:MMWAVE-STUDIO
I am trying to capture AWR1642BOOST ADC data using DCA1000 in mmWave Studio. I followed the steps shown in https://training.ti.com/sites/default/files/docs/mmwave_sensor_raw_data_capture_using_dca1000_v02.pdf.
After clicking DCA1000 ARM then Trigger Frame then Post Processing in mmwave Studio it shows dll error. The snapshot of the error is attached below.
The log file during my data capture is as follows:
GM: Constructor
GM: Thu Jun 13 15:24:31 2019
RSTD.Transmit("/Settings")
[15:24:32]
[15:24:32] ### Running Startup script: "C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\Scripts\Startup.lua" ###
[15:24:32] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[15:24:32] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[15:24:32] Scripter ignored: Attempt to UnBuild() again or before Build.
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Clients\\\\LabClient.dll")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\RunTime\\SAL.dll")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[15:24:32] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[15:24:32] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[15:24:32] RSTD.Transmit("/")
[15:24:32] RSTD.SaveSettings(): Settings saved to "C:\Users\DSP\AppData\Roaming\RSTD\config.xml"
[15:24:32] RSTD.Build()
[15:24:32] RSTD.SaveSettings(): Settings saved to "C:\Users\DSP\AppData\Roaming\RSTD\config.xml"
[15:24:32] RSTD.Transmit("/")
[15:24:32] RSTD.AL_Build()
[15:24:32] RSTD.AL_LoadXml()
[15:24:32] RSTD.Transmit("/")
[15:24:32] RSTD.AL_Init()
[15:24:32] RSTD.Clients_Build()
[15:24:32] GM: Init
[15:24:32] GM: Loaded 'C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\Clients\\LabClient.dll'
[15:24:32] GM: 1 Guest (s) init
[15:24:32] GM: 1 Module(s) init
[15:24:32] GM: 2 Tab (s) init
[15:24:32] RSTD.Client_LoadXml()
[15:24:33] [RadarAPI]: Starting Matlab Engine..
[15:26:02] [RadarAPI]: Matlab Engine Started!
[15:26:11] [RadarAPI]: ar1.LoadSettings('C:\Users\DSP\AppData\Roaming\RSTD\ar1gui.ini')
[15:26:14] TESTING = false
[15:26:14]
[15:26:14] ***Script completed successfully.***
[15:26:44] [RadarAPI]: Opening Gpio Control Port()
[15:26:44] [RadarAPI]: Status: Passed
[15:26:45] [RadarAPI]: Opening Board Control Port()
[15:26:45] [RadarAPI]: Status: Passed
[15:26:46] [RadarAPI]: ar1.FullReset()
[15:26:46] [RadarAPI]: Status: Passed
[15:26:47] [RadarAPI]: Closing Board Control Port()
[15:26:47] [RadarAPI]: Status: Passed
[15:26:47] [RadarAPI]: Closing Gpio Control Port()
[15:26:47] [RadarAPI]: Status: Passed
[15:26:47] [RadarAPI]: ar1.SOPControl(2)
[15:26:47] [RadarAPI]: Status: Passed
[15:26:51] [RadarAPI]: ar1.Connect(4,115200,1000)
[15:26:54] [RadarAPI]: ar1.Calling_IsConnected()
[15:26:55] [RadarAPI]: ar1.SelectChipVersion("AR1642")
[15:26:55] [RadarAPI]: Status: Passed
[15:26:55] [RadarAPI]: RS232 is not connected ..!!!!
[15:26:55] [RadarAPI]: ar1.frequencyBandSelection("77G")
[15:26:55] [RadarAPI]: ar1.SelectChipVersion("XWR1642")
[15:26:55] [RadarAPI]: Status: Passed
[15:26:55] Device Status : XWR1642/ASIL-B/SOP:2/ES:2
[15:26:56] [RadarAPI]: ar1.SelectChipVersion("AR1642")
[15:26:56] [RadarAPI]: Status: Passed
[15:26:56] [RadarAPI]: ar1.SelectChipVersion("XWR1642")
[15:26:56] [RadarAPI]: Status: Passed
[15:26:57] Device Status : XWR1642/ASIL-B/SOP:2/ES:2
[15:26:57] [RadarAPI]: ar1.SaveSettings('C:\Users\DSP\AppData\Roaming\RSTD\ar1gui.ini')
[15:27:06] [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr16xx_radarss.bin")
[15:27:07] [RadarAPI]: Downloading BSS Patch RPRC Binary..
[15:27:14] [RadarAPI]: ar1.GetBSSFwVersion()
[15:27:14] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17))
[15:27:15] [RadarAPI]: ar1.GetBSSPatchFwVersion()
[15:27:15] [RadarAPI]: BSSPatchFwVersion:(01.02.00.03 (24/10/18))
[15:27:19] [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr16xx_masterss.bin")
[15:27:19] [RadarAPI]: Downloading MSS RPRC Binary..
[15:27:36] [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[15:27:36] [RadarAPI]: Status: Passed
[15:27:36] MSS power up done async event received!
[15:27:44] [RadarAPI]: ar1.RfEnable()
[15:27:44] [RadarAPI]: Status: Passed
[15:27:44] BSS power up done async event received!
[15:27:45] [RadarAPI]: ar1.GetBSSFwVersion()
[15:27:45] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17))
[15:27:46] [RadarAPI]: ar1.GetBSSPatchFwVersion()
[15:27:46] [RadarAPI]: BSSPatchFwVersion:(01.02.00.03 (24/10/18))
[15:27:53] [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 2, 0)
[15:27:53] [RadarAPI]: Status: Passed
[15:27:58] [RadarAPI]: ar1.LPModConfig(0, 1)
[15:27:58] [RadarAPI]: Status: Passed
[15:28:00] [RadarAPI]: ar1.RfInit()
[15:28:00] RF Init async event received!
[15:28:00] [RadarAPI]: Status: Passed
[15:28:00] [RadarAPI]: Time stamp, Temperture: 15548,42; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 0, 0; RxIQMM Status, Update: 1, 1;
[15:28:05] [RadarAPI]: ar1.DataPathConfig(513, 1216644097, 0)
[15:28:05] [RadarAPI]: Status: Passed
[15:28:07] [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[15:28:07] [RadarAPI]: Status: Passed
[15:28:09] [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 0, 0, 1, 0, 0)
[15:28:09] [RadarAPI]: Status: Passed
[15:28:16] [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[15:28:16] [RadarAPI]: Status: Passed
[15:28:17] [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 0, 0)
[15:28:18] [RadarAPI]: Status: Passed
[15:28:19] Test Source Already Disabled...!!!
[15:28:19] [RadarAPI]: Status: Passed
[15:28:19] [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[15:28:19] [RadarAPI]: Status: Passed
[15:28:23] [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[15:28:23] [RadarAPI]: passed
[15:28:25] [RadarAPI]: StatusDCCard Event Registered
[15:28:25] [RadarAPI]: Status: Passed
[15:28:25] [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[15:28:25] [RadarAPI]: SYSTEM_CONNECT_CMD_CODE Async event recieved(9)
[15:28:26] [RadarAPI]: ConnectRFDCCard Status: Passed
[15:28:26] [RadarAPI]: ReadRFDCCarFpgaVersion Status: Passed
[15:28:26] [RadarAPI]: READ_FPGA_VERSION_CMD_CODE event recieved(14)
[15:28:26] [RadarAPI]: ar1.CaptureCardConfig_Mode(1, 2, 1, 2, 3, 30)
[15:28:26] [RadarAPI]: Status: Passed
[15:28:26] [RadarAPI]: CONFIG_FPGA_GEN_CMD_CODE Async event recieved(3)
[15:28:26] [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[15:28:26] [RadarAPI]: Status: Passed
[15:28:26] [RadarAPI]: CONFIG_PACKET_DATA_CMD_CODE Async event recieved(11)
[15:28:30] [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data.bin", 1)
[15:28:31] [RadarAPI]: RECORD_START_CMD_CODE Async event recieved(5)
[15:28:31] [RadarAPI]: Status: Passed
[15:28:32] [RadarAPI]: ar1.StartFrame()
[15:28:32] [RadarAPI]: Status: Passed
[15:28:32] Frame start async event received!
[15:28:33] Frame End async event received!
[15:28:33] [RadarAPI]: Frame Ended
[15:28:35] [RadarAPI]: STS_RECORD_COMPLETED Async event recieved(8)
[15:28:35] [RadarAPI]: ar1.CaptureCardConfig_StopRecord()
[15:28:35] [RadarAPI]: Status: Passed
[15:28:35] [RadarAPI]: RECORD_STOP_CMD_CODE Async event recieved(6)
[15:28:53] [RadarAPI]: Packet Reorder Utility Started...please wait...
[15:28:53] [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\pktlogfile.txt")
[15:29:05] [RadarAPI]: Packet Reorder Utility process completed!
[15:29:20] [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data.bin")
[15:29:22] [RadarAPI]: Error:
[15:29:22]
[15:29:22] ... MWMCR::EvaluateFunction error ...
[15:29:22] 13-Jun-2019 15:29:21: The file C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\PostProc\adc_data.bin is empty. Please capture more data.,1,
[15:29:22] Error in => process_adc_data.m at line 52.
[15:29:22]
[15:29:22] ... Matlab M-code Stack Trace ...
[15:29:22] at
[15:29:22] file C:\Users\DSP\AppData\Local\Temp\DSP\mcrCache8.5.1\Matlab0\Logging\log_status.m, name log_status, line 32.
[15:29:22] at
[15:29:22] file C:\Users\DSP\AppData\Local\Temp\DSP\mcrCache8.5.1\Matlab0\Processing_functions\read_adc_data.m, name read_adc_data, line 28.
[15:29:22] at
[15:29:22] file C:\Users\DSP\AppData\Local\Temp\DSP\mcrCache8.5.1\Matlab0\MatlabPostPr\process_adc_data.m, name process_adc_data, line 52.
[15:29:22]
[15:29:22]
[15:29:22] Trace:
[15:29:22] at MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(String functionName, Int32 numArgsOut, Int32 numArgsIn, MWArray[] argsIn)
[15:29:22] at MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(Int32 numArgsOut, String functionName, MWArray[] argsIn)
[15:29:22] at MatlabPostProcGui.MatlabPostProcGUIClass.process_adc_data(MWArray adc_file_name, MWArray force_cont_stream_mode)
[15:29:22] at AR1xController.frmAR1Main.iStartCaptureMtlabPostProc()
GM: Thu Jun 13 15:24:31 2019
RSTD.Transmit("/Settings")
[15:24:32]
[15:24:32] ### Running Startup script: "C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\Scripts\Startup.lua" ###
[15:24:32] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[15:24:32] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[15:24:32] Scripter ignored: Attempt to UnBuild() again or before Build.
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Clients\\\\LabClient.dll")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[15:24:32] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\RunTime\\SAL.dll")
[15:24:32] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[15:24:32] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[15:24:32] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[15:24:32] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[15:24:32] RSTD.Transmit("/")
[15:24:32] RSTD.SaveSettings(): Settings saved to "C:\Users\DSP\AppData\Roaming\RSTD\config.xml"
[15:24:32] RSTD.Build()
[15:24:32] RSTD.SaveSettings(): Settings saved to "C:\Users\DSP\AppData\Roaming\RSTD\config.xml"
[15:24:32] RSTD.Transmit("/")
[15:24:32] RSTD.AL_Build()
[15:24:32] RSTD.AL_LoadXml()
[15:24:32] RSTD.Transmit("/")
[15:24:32] RSTD.AL_Init()
[15:24:32] RSTD.Clients_Build()
[15:24:32] GM: Init
[15:24:32] GM: Loaded 'C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\Clients\\LabClient.dll'
[15:24:32] GM: 1 Guest (s) init
[15:24:32] GM: 1 Module(s) init
[15:24:32] GM: 2 Tab (s) init
[15:24:32] RSTD.Client_LoadXml()
[15:24:33] [RadarAPI]: Starting Matlab Engine..
[15:26:02] [RadarAPI]: Matlab Engine Started!
[15:26:11] [RadarAPI]: ar1.LoadSettings('C:\Users\DSP\AppData\Roaming\RSTD\ar1gui.ini')
[15:26:14] TESTING = false
[15:26:14]
[15:26:14] ***Script completed successfully.***
[15:26:44] [RadarAPI]: Opening Gpio Control Port()
[15:26:44] [RadarAPI]: Status: Passed
[15:26:45] [RadarAPI]: Opening Board Control Port()
[15:26:45] [RadarAPI]: Status: Passed
[15:26:46] [RadarAPI]: ar1.FullReset()
[15:26:46] [RadarAPI]: Status: Passed
[15:26:47] [RadarAPI]: Closing Board Control Port()
[15:26:47] [RadarAPI]: Status: Passed
[15:26:47] [RadarAPI]: Closing Gpio Control Port()
[15:26:47] [RadarAPI]: Status: Passed
[15:26:47] [RadarAPI]: ar1.SOPControl(2)
[15:26:47] [RadarAPI]: Status: Passed
[15:26:51] [RadarAPI]: ar1.Connect(4,115200,1000)
[15:26:54] [RadarAPI]: ar1.Calling_IsConnected()
[15:26:55] [RadarAPI]: ar1.SelectChipVersion("AR1642")
[15:26:55] [RadarAPI]: Status: Passed
[15:26:55] [RadarAPI]: RS232 is not connected ..!!!!
[15:26:55] [RadarAPI]: ar1.frequencyBandSelection("77G")
[15:26:55] [RadarAPI]: ar1.SelectChipVersion("XWR1642")
[15:26:55] [RadarAPI]: Status: Passed
[15:26:55] Device Status : XWR1642/ASIL-B/SOP:2/ES:2
[15:26:56] [RadarAPI]: ar1.SelectChipVersion("AR1642")
[15:26:56] [RadarAPI]: Status: Passed
[15:26:56] [RadarAPI]: ar1.SelectChipVersion("XWR1642")
[15:26:56] [RadarAPI]: Status: Passed
[15:26:57] Device Status : XWR1642/ASIL-B/SOP:2/ES:2
[15:26:57] [RadarAPI]: ar1.SaveSettings('C:\Users\DSP\AppData\Roaming\RSTD\ar1gui.ini')
[15:27:06] [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr16xx_radarss.bin")
[15:27:07] [RadarAPI]: Downloading BSS Patch RPRC Binary..
[15:27:14] [RadarAPI]: ar1.GetBSSFwVersion()
[15:27:14] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17))
[15:27:15] [RadarAPI]: ar1.GetBSSPatchFwVersion()
[15:27:15] [RadarAPI]: BSSPatchFwVersion:(01.02.00.03 (24/10/18))
[15:27:19] [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr16xx_masterss.bin")
[15:27:19] [RadarAPI]: Downloading MSS RPRC Binary..
[15:27:36] [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[15:27:36] [RadarAPI]: Status: Passed
[15:27:36] MSS power up done async event received!
[15:27:44] [RadarAPI]: ar1.RfEnable()
[15:27:44] [RadarAPI]: Status: Passed
[15:27:44] BSS power up done async event received!
[15:27:45] [RadarAPI]: ar1.GetBSSFwVersion()
[15:27:45] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17))
[15:27:46] [RadarAPI]: ar1.GetBSSPatchFwVersion()
[15:27:46] [RadarAPI]: BSSPatchFwVersion:(01.02.00.03 (24/10/18))
[15:27:53] [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 2, 0)
[15:27:53] [RadarAPI]: Status: Passed
[15:27:58] [RadarAPI]: ar1.LPModConfig(0, 1)
[15:27:58] [RadarAPI]: Status: Passed
[15:28:00] [RadarAPI]: ar1.RfInit()
[15:28:00] RF Init async event received!
[15:28:00] [RadarAPI]: Status: Passed
[15:28:00] [RadarAPI]: Time stamp, Temperture: 15548,42; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 0, 0; RxIQMM Status, Update: 1, 1;
[15:28:05] [RadarAPI]: ar1.DataPathConfig(513, 1216644097, 0)
[15:28:05] [RadarAPI]: Status: Passed
[15:28:07] [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[15:28:07] [RadarAPI]: Status: Passed
[15:28:09] [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 0, 0, 1, 0, 0)
[15:28:09] [RadarAPI]: Status: Passed
[15:28:16] [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[15:28:16] [RadarAPI]: Status: Passed
[15:28:17] [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 0, 0)
[15:28:18] [RadarAPI]: Status: Passed
[15:28:19] Test Source Already Disabled...!!!
[15:28:19] [RadarAPI]: Status: Passed
[15:28:19] [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[15:28:19] [RadarAPI]: Status: Passed
[15:28:23] [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[15:28:23] [RadarAPI]: passed
[15:28:25] [RadarAPI]: StatusDCCard Event Registered
[15:28:25] [RadarAPI]: Status: Passed
[15:28:25] [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[15:28:25] [RadarAPI]: SYSTEM_CONNECT_CMD_CODE Async event recieved(9)
[15:28:26] [RadarAPI]: ConnectRFDCCard Status: Passed
[15:28:26] [RadarAPI]: ReadRFDCCarFpgaVersion Status: Passed
[15:28:26] [RadarAPI]: READ_FPGA_VERSION_CMD_CODE event recieved(14)
[15:28:26] [RadarAPI]: ar1.CaptureCardConfig_Mode(1, 2, 1, 2, 3, 30)
[15:28:26] [RadarAPI]: Status: Passed
[15:28:26] [RadarAPI]: CONFIG_FPGA_GEN_CMD_CODE Async event recieved(3)
[15:28:26] [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[15:28:26] [RadarAPI]: Status: Passed
[15:28:26] [RadarAPI]: CONFIG_PACKET_DATA_CMD_CODE Async event recieved(11)
[15:28:30] [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data.bin", 1)
[15:28:31] [RadarAPI]: RECORD_START_CMD_CODE Async event recieved(5)
[15:28:31] [RadarAPI]: Status: Passed
[15:28:32] [RadarAPI]: ar1.StartFrame()
[15:28:32] [RadarAPI]: Status: Passed
[15:28:32] Frame start async event received!
[15:28:33] Frame End async event received!
[15:28:33] [RadarAPI]: Frame Ended
[15:28:35] [RadarAPI]: STS_RECORD_COMPLETED Async event recieved(8)
[15:28:35] [RadarAPI]: ar1.CaptureCardConfig_StopRecord()
[15:28:35] [RadarAPI]: Status: Passed
[15:28:35] [RadarAPI]: RECORD_STOP_CMD_CODE Async event recieved(6)
[15:28:53] [RadarAPI]: Packet Reorder Utility Started...please wait...
[15:28:53] [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\pktlogfile.txt")
[15:29:05] [RadarAPI]: Packet Reorder Utility process completed!
[15:29:20] [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_02_00_00_02\\mmWaveStudio\\PostProc\\adc_data.bin")
[15:29:22] [RadarAPI]: Error:
[15:29:22]
[15:29:22] ... MWMCR::EvaluateFunction error ...
[15:29:22] 13-Jun-2019 15:29:21: The file C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\PostProc\adc_data.bin is empty. Please capture more data.,1,
[15:29:22] Error in => process_adc_data.m at line 52.
[15:29:22]
[15:29:22] ... Matlab M-code Stack Trace ...
[15:29:22] at
[15:29:22] file C:\Users\DSP\AppData\Local\Temp\DSP\mcrCache8.5.1\Matlab0\Logging\log_status.m, name log_status, line 32.
[15:29:22] at
[15:29:22] file C:\Users\DSP\AppData\Local\Temp\DSP\mcrCache8.5.1\Matlab0\Processing_functions\read_adc_data.m, name read_adc_data, line 28.
[15:29:22] at
[15:29:22] file C:\Users\DSP\AppData\Local\Temp\DSP\mcrCache8.5.1\Matlab0\MatlabPostPr\process_adc_data.m, name process_adc_data, line 52.
[15:29:22]
[15:29:22]
[15:29:22] Trace:
[15:29:22] at MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(String functionName, Int32 numArgsOut, Int32 numArgsIn, MWArray[] argsIn)
[15:29:22] at MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(Int32 numArgsOut, String functionName, MWArray[] argsIn)
[15:29:22] at MatlabPostProcGui.MatlabPostProcGUIClass.process_adc_data(MWArray adc_file_name, MWArray force_cont_stream_mode)
[15:29:22] at AR1xController.frmAR1Main.iStartCaptureMtlabPostProc()