Part Number:LAUNCHXL-CC1310
I have 2 custom made different boards B1 and B2. I am trying to flash these board with different hex files using smartrf programmer 2. B1 takes 4.5V and B2 takes 3.3V. Have used same CC1310 on both the boards.
I was successfully able to program B1 using CC1310 launchpad by connecting jtag pins and external 4.5V power supply.
I was able to program B2 using CC1310 launchpad by connecting jtag pins and 3.3V (XDS_VCC) from the launchpad board.
But when I use CC1310_VDD or external power supply B2 doesnt seem to be working. It would be very helpful to get solution for this issue. As I have to use external power supply to program this board.
Thank you.