Hello TI,
Below is the issue one of our customer is facing in boost mode. they are not achieving the Maximum current at load(using SOM module)
In transient (observed 650 to 700mV dip during boot up)
Input supply: 3.3V @ 4A
application requirement is below
Output : Min 2.5A @ 3.3V for input ranging 3V to 4.1V.
Input Source: Single cell Li battery capable of sourcing max 5A
Customer Query:
. With the input of 3V @ 4A we were able to achieve 3.3V @800mA.
As per the datasheet expected current at 3V input is more than 2A @3.3V but we were able to get only 800mA.
Customer requirement is min of 2A output at 3V input and were are able to achieve only 800mA?
Kindly review the schematic which I have shared and suggest us for further proceed
Regards
Yashwitha