Part Number:LM5170EVM-BIDIR
Dear Ti,
I have recently got "LM5170EVM-BIDIR", and i have set ISETA command voltage as '1.5V' so i assume 12V port will take 60A max now i'm using as Boost mode, so My questions is as follows:
1.> Suppose my I/p is 12V so if i/P will take 60A current so will i get as o/p 50.5V with 14.25A current?(power of 720W transfer) ( suppose not considering any losses and lower current when considering a losses).
2.> Suppose my I/p is 48V so if i/P will take 60A current so will i get as o/p 50.5V with 57A current?(power of 2880W transfer) ( suppose not considering any losses and lower current when considering a losses).
Am i right or wrong?
If i'm right So kindly suggest so i just need O/p current as 50.5V with 10A max only, so am i suppose to provide ISETA command voltage according to I/p voltage? for example
if my i/p voltage is 12V so for O/p with 50.5V with 10A ISETA needs to be around '1.05V' and if my i/p voltage is 48V so for O/p with 50.5V with 10A ISETA needs to be around '0.263V'. Am i assuming it correct? If not please make my understand! Deeply awaiting your reply.
Regards,
Vijay Gohil