Linux/AM5708: Not able to get data on video port

Part Number:AM5708

Tool/software: Linux

Hello,

I have done below pin-muxing to get data on video port.

I am using video-port2 as our input videoport.

/* Video Input Port-2 muxing */
        vin2_pins_default: vin2_pins_default {
                pinctrl-single,pins = <
                        0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_clk0.vin2a_clk0 */
                        0x160 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_hsync0.vin2a_hsync0 */
                        0x164 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_vsync0.vin2a_vsync0 */
                        0x15C (PIN_OUTPUT_PULLUP | MUX_MODE14) /* vin2a_fld0.gpio2_7 */
                        0x158 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_de0.vin2a_de0 */
                        0x168 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d0.vin2a_d0 */
                        0x16C (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d1.vin2a_d1 */
                        0x170 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d2.vin2a_d2 */
                        0x174 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d3.vin2a_d3 */
                        0x178 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d4.vin2a_d4 */
                        0x17C (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d5.vin2a_d5 */
                        0x180 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d6.vin2a_d6 */
                        0x184 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* vin2a_d7.vin2a_d7 */

                >;
        };

I am able to prob on processor pad. So data is coming from sensor to processor, but any how  I am not able to get any data on "cat /dev/video1".

As per my understanding there should be some random data coming out on "/dev/video1".

We are using mt9t11 bulit in SDK driver.

SDK Version: 05.01.00.11

Kernel Version:4.14.67

Thanks,

Prerak