Part Number:AM3354
Our story:
1. our board use AM3354 with NAND, DDR2, UART, Micro-SD card etc....
2. NAND is MT29F1G08ABADAH4:D,
3. DDR2 is MT47H128M16, . . .
Our status:
1. It boots up fine from Micro--SD card, SYSBOOT[4:0] = "10110"
2. it boots up fine from NAND when SYSBOOT[4:0] = "10100"
Our problem:
1. it boots up from NAND when SYSBOOT[4:0] = "00111". However it takes about 5 ~ 6 minutes every time re-cycle the power.
Any ideas? Thank you.