AWR1642: VOUT_PA Internal LDO Voltage

Part Number:AWR1642

Hi All,

I have a question, on the original 1.0 AWR1642BOOST I measure this at 0V DC (VOUT_PA, balls A2 and B2).  On the 1.1 and 2.0 I measure it at 0.94V DC.  The datasheet specifies that this is either a 1.3V signal, or a 1.0V signal.

This is the output of an internal LDO, and it's within 6%, but this seemed a little odd.

Is the spec going to change for this?