Part Number:CC1310
Hello!
After some work with the custom device on the chip CC1310F128, my chip is locked and I can not unlock it.
I program it via CC1310 LaunchPad - XDS110
This happened after some experiments with the example nvsinternal_CC1310_LAUNCHXL_tirtos_ccs
Reading and Writing occurred from the address 0x1F000. After a while, the chip stopped programming.
I tried to do a mass erase in the SmartRF Flash Programmer. But the chip is still not programmable.
What can I try again?
UniFlash gives the result of erasing
[15.08.2018, 19:13:38] [INFO] Cortex_M3_0: GEL Output: Memory Map Initialization Complete.
[15.08.2018, 19:13:38] [INFO] Cortex_M3_0: MassErase(): Initializing.
[15.08.2018, 19:13:38] [INFO] Cortex_M3_0: MassErase(): Issuing Board Reset.
[15.08.2018, 19:13:39] [INFO] Cortex_M3_0: MassErase(): Mass erase complete.
[15.08.2018, 19:13:39] [INFO] Cortex_M3_0: GEL Output: Memory Map Initialization Complete.
[15.08.2018, 19:13:40] [ERROR] IcePick_C: Error connecting to the target: (Error -241 @ 0x0) A router subpath could not be accessed. A security error has probably occurred. Make sure your device is unlocked. (Emulation package 8.0.27.9)