Part Number:ISO120
URGENT
Hello,
I am planning on using the ISO120SG (with C1=C2=0) in an application where there will be 6kV/us IMV transients that are 0.020 us long (and that occur at a fixed 40 kHz frequency/every 12.5 us).
The ISO output will obviously be erroneous during the 0.020 us long 6kV/us IMV transient.
My question is after how much time (after the 0.020 us long 6kV/us IMV transient) will it become correct again and be within spec.
Best Regards,
Nicolas