Part Number:TMDSICE3359
Tool/software: Code Composer Studio
Hi Experts,
I am trying to erase SPI flash of AM3359 ICEv2 to boot the board from SD card. For that i followed TI's wiki.
i connected my pc with ICE and started CCS. As per wiki launched target configuration file(AM3359-ice-v2.ccxml) and tried to connect target with debug probe but showing status "Texas Instruments XDS 100v2 Usb Debug Probe_0/CortexA8(suspended)......0x0002008C(no symbols are defined).
On console i have seen:
"IcePick_D_0: Error: (Error -150 @ 0x0) One of the FTDI driver functions used during configuration returned a invalid status or an error. (Emulation package 8.0.27.9)
CS_DAP_DebugSS: Error: (Error -154 @ 0x0) One of the FTDI driver functions used to write data returned bad status or an error. (Emulation package 8.0.27.9)
CortxA8: Trouble Reading Memory Block at 0x4c on Page 0 of Length 0x58: (Error -2130 @ 0x4C) Unable to access device memory. Verify that the memory address is in valid memory. If error persists, confirm configuration, power-cycle board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.0.27.9)
CortxA8: JTAG Communication Error: (Error -154 @ 0x0) One of the FTDI driver functions used to write data returned bad status or an error. (Emulation package 8.0.27.9)"
Could you please help me to come out this issue.
Best Regards,
Gourav