Part Number:CC2640R2F
Tool/software: Code Composer Studio
Hi !!!
In my project, I need to advertising and scanning at the same time. so now I using simple_peripheral_observer_cc2640r2lp example.
There are two types of boards: A: (advertising only) / B:( both of advertising and scanning)
The B type board receives the scan_response of the type A board and updates its advertising and scan_response data.
So I set the scanning parameters as follows..(because there are many advertising data to be recevied, the cycle have to set sort)
Of course I tried setting it to a larger value.
Scanning is perform through GapRole_StartDiscovery() in periodic events and the cycle time is as follows
The operation itself is done as desired, but it stops working after 1minute( between 30 seconds and 1minute)
Is there a problem like scanning overflow? or is it possible to stop for other reasons?
Thank you!