Part Number:TLC6C5712-Q1
Hi,
I am using the TLC6C5712-Q1 device to create a circuit.
An overview of the circuit is shown in the figure below.
(1) The layout has a resistance value (R10 to R21, R30 to R41) at both ends of the LED.
(2) Each of the above resistance values has a variation of about 50Ω to about 100Ω.
(3) The variation in the resistance value varies depending on the layout.
(4) Voltage specifications : V(supply) = 5.0V, Vcc = 3.3V, LED VF = 3.2V
Is it possible to turn on the LED properly with the set current value even if the resistance value is present as described above?
Please let me know if there are any problems.
Best regards,
