Part Number:CC1352R
I have posted similar messages before, but not in the BLE Forum.
I have a project that is using the CC1352. We chose that device because needed both Bluetooth and the low frequency WIFI. A Bluetooth microphone using A2DP protocol will be used. The CC1352 Bluetooth will pair with the microphone only. I have looked through all of the BLE examples for the CC13xx and 26XX series and can not find any examples of reading the A2DP MP3 from the microphone. Are there any drivers that I can use to build my firmware. The MP3 data from the microphone will be mixed in hardware with another MP3 source and then transmitter over the low freq WIFI to a remote CC1352 which will process it and play it over speakers. I had planned to use the Easylink Listen Before Talk as the base of my firmware.
Another question I have is about the MP3 data, do I need to convert it to PDM to transmit it? I looked at the PDM modules, but was not sure how to use it. Are there any examples were PMD was used? I was told to port the pdmstream example, but how do I do that?