Part Number:CC3200
Hi guys,
The last bin file that is in my device was when I did the wlan station project that I followed on the T.I channel on YouTube which was a really good teaching experience on my side. Now I wanted to go back to AP mode so I flashed the bin file of the http server example to the device. I then tested it by plugging to an external power supply source and I was able to connect to the "mysimplelink" SSID.
My questions are:
1. was that the correct process in writing a new bin file to the device? Or
2. Should I reformat it and update the firmware after using a service pack then writing the new bin file?
3. Using the reference screenshot below I was following the wlan station example at the T.I channel on YouTube I had to import these project files from the sdk. So I am assuming
that since I am doing the wlan station project, all the other four project files namely driverlib, oslib, simplelink, ri_rtos_config are the base project files which are mandatory
for the device to work? and whatever you add on top of these four base project files will determine the nature of the project? I'm a real beginner here so I'm trying to understand how the system works.
Thanks in advance!
Paul