Part Number:TLV62095
Tool/software:TINA-TI or Spice Models
Hi,
I am doing simulation with TLV62095, generating 1V power supply from a 5V input.
When the load is set to 0.3Ohm, it seems like the output voltage cannot go higher than 0.5V (dumping between 0 and 0.5V). There seems like a spike current on SS pin that caused the output droop.
If the load is changed to 0.5Ohm, output voltage become fine.
This part is a 4A power supply chip, I should have survived eve 0.25Ohm, why it failed in 0.3Ohm load?
