Hi,
sorry for waking this solved thread from the dead, but this thread is the closest I've come to solving my problem.
I'm working with a cc1312r1 Launchpad, which I have flashed with a binary that locks all debug interfaces (ie serial bootloader, jtag, etc) through CCFG configuration. This works as intended on cc1310, cc1350 etc, I just have to do a forced mass erase in SmartRF Flasher2 when I want to reflash it.
Now, SmartRF Flasher2 doesn't support CC1312r1 yet. And uniflash and all other tools I've tried doesn't do forced mass erase - it just reports the error"IcePick_C: Error connecting to the target: (Error -241 @ 0x0) A router subpath could not be accessed. A security error has probably occurred. Make sure your device is unlocked. (Emulation package 7.0.100.0)".
Thus, dbgjtag seems like the only resort I have to perform a forced mass erase of my device, but I can't find the proper settings.
Which leads to the question - what is the arguments necessary to perform a forced mass erase of the cc1312r1 with dbgjtag.exe?
I have plenty of SmartRF06EBK and other Launchpads etc so can plug any of them in. For example, I disconnect all jumpers on the cc1312 and a cc1310 and hook them up with the 10-pin 1.27mm JTAG cable, but still no dice. Can't force mass erase.