Part Number:MSP432P401R
Tool/software: Code Composer Studio
Hi,
The end device will run on direct power supply, no battery backup.
To upgrade firmware via BSL will not be worked out in our solution, due to some limitation.
What the solution we are working is the 3 APP solution.(i.e BASIC APP, APP1 and APP2)
1) Basic APP.
The Basic APP run first after reset and check the flag for boot reason, either it is normal reset or reset for software upgrade.
If it is normal reset, then jump to APP1 or APP2.
If reset is for software upgrade the basic app will do the software upgrade, and after upgrade it will jump to the updated APP.
2) APP1 or APP2
The APP1/APP2 is the main application, it will do the system function as well as check for s/w upgrade, if there is any request for software upgrade. The App will jump to Basic APP by setting flag.
Now all the 3 projects is APP project and have same linker script. so all have same memory map. Could you help on it.
I have refer MSP430, there we have solution of MSPBoot and MSPAPP. and some script file. But not found same for MSP432.